Discontinued
AXJ3
COMPATIBLE WITH
HDMI STANDARD
Receptacle:
Horizontal type
Receptacle:
Vertical type
Compliance with RoHS Directive
3. Horizontal and vertical type
receptacles are usable on the same
foot pattern.
Either the horizontal or vertical type can
be used on the same printed circuit
board, reducing the design cost and the
number of components to be controlled in
the target equipment.
4. Shell having a GND structure for
EMI prevention
The screw flange and the metal clips
have enhanced grounding performance.
HDMI
CONNECTORS
6. Structure with high resistance to
twisting forces
The resistance has been increased by
adopting a structure with a screw flange
and DIP terminal metal clips fixed to the
housing and circuit board, crimping the
shell bottom, and holding it with the
molded part.
Crimped section at
the shell bottom
The shell bottom is
inserted and engaged
in the concave section
of the molded part.
FEATURES
1. High-level impedance matching
performance based on HDMI
Standards
2. Space-saving size
Horizontal type: 9.8 mm in depth
Vertical type: 9.0 mm in height
Vertical type
DIP terminal metal clips
5. Structure with high resistance to
the excessive press-in force of a plug
Horizontal type
Inlet
Stopper
9.0mm
Interface connectors
Screw flange
Inlet
9.8mm
ORDERING INFORMATION
AXJ
3
1
4
2
T
3: HDMI connectors
1: Receptacle
1: 19/Horizontal
2: 19/Vertical
4: DIP metal clips/Without positioning projections
2: Center flange
T: Tray packaging
PRODUCT TYPES
Number of terminals
Inlet direction
Part No.
19 terminals
Horizontal type
Vertical type
AXJ31142T
AXJ31242T
Matsushita Electric Works, Ltd.
Packing quantity
Inner carton (tray)
Outer carton
100
1,000
http://www.mew.co.jp/ac/e/