Quad, 12-/14-/16-Bit nanoDACs with
5 ppm/°C On-Chip Reference
AD5624R/AD5644R/AD5664R
Data Sheet
FEATURES
FUNCTIONAL BLOCK DIAGRAM
VDD
GND
VREFIN/VREFOUT
AD5624R/AD5644R/AD5664R
1.25V/2.5V REF
INPUT
REGISTER
DAC
REGISTER
STRING
DAC A
BUFFER
VOUTA
INPUT
REGISTER
DAC
REGISTER
STRING
DAC B
BUFFER
VOUTB
INPUT
REGISTER
DAC
REGISTER
STRING
DAC C
BUFFER
VOUTC
INPUT
REGISTER
DAC
REGISTER
STRING
DAC D
BUFFER
VOUTD
SCLK
INTERFACE
LOGIC
SYNC
DIN
POWER-ON
LOGIC
APPLICATIONS
POWERDOWN
LOGIC
05856-001
Low power, smallest pin-compatible, quad nanoDACs
AD5664R: 16 bits
AD5644R: 14 bits
AD5624R: 12 bits
User-selectable external or internal reference
External reference default
On-chip 1.25 V/2.5 V, 5 ppm/°C reference
10-lead MSOP; 10-lead, 3 mm × 3 mm LFCSP_WD; and
12-ball, 1.665 mm × 2.245 mm WLCSP
2.7 V to 5.5 V power supply
Guaranteed monotonic by design
Power-on reset to zero scale
Per channel power-down
Serial interface, up to 50 MHz
Figure 1.
Process controls
Data acquisition systems
Portable battery-powered instruments
Digital gain and offset adjustment
Programmable voltage and current sources
Programmable attenuators
Table 1. Related Devices
Part No.
AD5624/AD5664
AD5666
Description
2.7 V to 5.5 V quad, 12-/16-bit DACs, external
reference
2.7 V to 5.5 V quad, 16-bit DAC, internal
reference, LDAC, CLR pins
GENERAL DESCRIPTION
The AD5624R/AD5644R/AD5664R, members of the nanoDAC®
family, are low power, quad, 12-/14-/16-bit buffered voltage-out
DACs. All devices operate from a single 2.7 V to 5.5 V supply
and are guaranteed monotonic by design.
480 nA at 5 V and provides software-selectable output loads
while in power-down mode. The low power consumption of
this part in normal operation makes it ideally suited to portable
battery-operated equipment.
The AD5624R/AD5644R/AD5664R have an on-chip reference.
The AD56x4R-3 has a 1.25 V, 5 ppm/°C reference, giving a fullscale output range of 2.5 V; the AD56x4R-5 has a 2.5 V, 5 ppm/°C
reference giving a full-scale output range of 5 V. The on-chip
reference is off at power-up, allowing the use of an external
reference; all devices can be operated from a single 2.7 V to
5.5 V supply. The internal reference is enabled via a software
write.
The AD5624R/AD5644R/AD5664R use a versatile 3-wire serial
interface that operates at clock rates up to 50 MHz, and is compatible with standard SPI, QSPI™, MICROWIRE™, and DSP
interface standards. The on-chip precision output amplifier
enables rail-to-rail output swing.
The part incorporates a power-on reset circuit that ensures the
DAC output powers up to 0 V and remains there until a valid
write takes place. The part contains a per-channel power-down
feature that reduces the current consumption of the device to
Rev. C
PRODUCT HIGHLIGHTS
1.
2.
3.
4.
Quad 12-/14-/16-bit DACs.
On-chip 1.25 V/2.5 V, 5 ppm/°C reference.
Available in 10-lead MSOP; 10-lead, 3 mm × 3 mm
LFCSP_WD; and 12-ball, 1.665 mm × 2.245 mm WLCSP.
Low power, typically consumes 1.32 mW at 3 V and
2.25 mW at 5 V.
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2006–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
