HOME＞在庫検索＞在庫情報
TJA1021T,112
TJA1021 LIN 2.1/SAE J2602 transceiver Rev. 7 — 25 March 2011 Product data sheet 1. General description The TJA1021 is the interface between the Local Interconnect Network (LIN) master/slave protocol controller and the physical bus in a LIN. It is primarily intended for in-vehicle sub-networks using baud rates from 1 kBd up to 20 kBd and is LIN 2.1/SAE J2602 compliant. The TJA1021 is pin-to-pin compatible with the TJA1020 with an improved ElectroStatic Discharge (ESD) specification. The transmit data stream of the protocol controller at the transmit data input (TXD) is converted by the TJA1021 into a bus signal with optimized slew rate and wave shaping to minimize ElectroMagnetic Emission (EME). The LIN bus output pin is pulled HIGH via an internal termination resistor. For a master application, an external resistor in series with a diode should be connected between pin INH or pin VBAT and pin LIN. The receiver detects the data stream at the LIN bus input pin and transfers it via pin RXD to the microcontroller. In Sleep mode, the power consumption of the TJA1021 is very low. In failure modes, the power consumption is reduced to a minimum. 2. Features and benefits 2.1 General LIN 2.1/SAE J2602 compliant Baud rate up to 20 kBd Very low ElectroMagnetic Emission (EME) High ElectroMagnetic Immunity (EMI) Passive behavior in unpowered state Input levels compatible with 3.3 V and 5 V devices Integrated termination resistor for LIN slave applications Wake-up source recognition (local or remote) K-line compatible Pin-to-pin compatible with TJA1020 Available in SO8 and HVSON8 packages Leadless HVSON8 package (3.0 mm 3.0 mm) with improved Automated Optical Inspection (AOI) capability 2.2 Low power management Very low current consumption in Sleep mode with local and remote wake-up
NXP
NXP Semiconductors
オランダ
世界的な半導体サプライヤで、エネルギー効率、コネクテッド・デバイス、セキュリティ、ヘルスケアの4つの世界的なメガトレンドに対応し、高性能ミックスドシグナルICのほか、ディスクリートなどの汎用製品をグローバルに提供している。
お買い上げ小計が１万円以上の場合は送料はサービスさせて頂きます。１万円未満の場合、また時間指定便はお客様負担となります。（送料は地域により異なります。）
