HOME＞在庫検索＞在庫情報
TFP410PAP
TFP410 TI PanelBus DIGITAL TRANSMITTER SLDS145A − OCTOBER 2001 − REVISED JANUARY 2002 D Digital Visual Interface (DVI) Compliant1 D Supports Resolutions From VGA to UXGA D Enhanced Jitter Performance (25 MHz – 165 MHz Pixel Rates) D D D Universal Graphics Controller Interface D − 12-Bit, Dual-Edge and 24-Bit, Single-Edge Input Modes − Adjustable 1.1 V to 1.8 V and Standard 3.3 V CMOS Input Signal Levels − Fully Differential and Single-Ended Input Clocking Modes − Standard Intel 12-Bit Digital Video Port Compatible as on Intel 81x Chipsets Enhanced PLL Noise Immunity − On-Chip Regulators and Bypass Capacitors for Reducing System Costs D D D D − No HSYNC Jitter Anomaly − Negligible Data-Dependent Jitter Programmable Using I2C Serial Interface Monitor Detection Through Hot-Plug and Receiver Detection Single 3.3-V Supply Operation 64-Pin TQFP Using TI’s PowerPAD Package TI’s Advanced 0.18 µm EPIC-5 CMOS Process Technology Pin Compatible With SiI164 DVI Transmitter description The TFP410 is a Texas Instruments PanelBus flat panel display product, part of a comprehensive family of end-to-end DVI 1.0-compliant solutions, targeted at the PC and consumer electronics industry. The TFP410 provides a universal interface to allow a glue-less connection to most commonly available graphics controllers. Some of the advantages of this universal interface include selectable bus widths, adjustable signal levels, and differential and single-ended clocking. The adjustable 1.1-V to 1.8-V digital interface provides a low-EMI, high-speed bus that connects seamlessly with 12-bit or 24-bit interfaces. The DVI interface supports flat panel display resolutions up to UXGA at 165 MHz in 24-bit true color pixel format. The TFP410 combines PanelBus circuit innovation with TI’s advanced 0.18 µm EPIC-5 CMOS process technology and TI’s ultralow ground inductance PowerPAD package. The result is a compact 64-pin TQFP package providing a reliable, low-current, low-noise, high-speed digital interface solution. This device contains circuits to protect its inputs and outputs against damage due to high static voltages or electrostatic fields. These circuits have been qualified to protect this device against electrostatic discharges (ESD) of up to 2 kV according to MIL-STD-883C, Method 3015; however, it is advised that precautions be taken to avoid application of any voltage higher than maximum-rated voltages to these high-impedance circuits. During storage or handling, the device leads should be shorted together or the device should be placed in conductive foam. In a circuit, unused inputs should always be connected to an appropriated logic voltage level, preferably either VCC or ground. Specific guidelines for handling devices of this type are contained in the publication Guidelines for Handling Electrostatic-Discharge-Sensitive (ESDS) Devices and Assemblies available from Texas Instruments. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Footnote: 1. The digital visual interface (DVI) specification is an industry standard developed by the digital display working group (DDWG) for high-speed digital connection to digital displays and has been adopted by industry-leading PC and consumer electronics manufacturers. The TFP410 is compliant to the DVI Revision 1.0 specification. PanelBus, PowerPAD, and EPIC-5 are trademarks of Texas Instruments. VESA is a trademark of Video Electronics Standards Association. Intel is a trademark of Intel Corporation. Copyright 2002, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1
TI
Texas Instruments Incorporated
U.S.A
世界25ヶ国以上に製造・販売拠点を有する国際的な半導体企業であり、デジタル情報家電、ワイヤレス、ブロードバンド市場に欠かせないデジタル信号処理を行うDSPと、それに関連するアナログIC、マイクロコントローラを主力製品としている。
弊社からの見積回答メールの返信又はFAXにてお願いします。
