DATA SHEET
MOS INTEGRATED CIRCUIT
µPD485505
LINE BUFFER
5K-WORD BY 8-BIT
Description
The µPD485505 is a 5,048 words by 8 bits high speed FIFO (First In First Out) line buffer. Its CMOS static circuitry
provides high speed access and low power consumption.
The µPD485505 can be used for one line delay and time axis conversion in high speed facsimile machines and
digital copiers.
Moreover, the µPD485505 can execute read and write operations independently on an asynchronous basis. Thus
the µPD485505 is suitable as a buffer for data transfer between units with different transfer rates and as a buffer for
the synchronization of multiple input signals. There are three versions, E, K, P, and L. This data sheet can be applied
to the version P and L. These versions operate with different specifications. Each version is identified with its lot
number (refer to 7. Example of Stamping).
Features
• 5,048 words by 8 bits
• Asynchronous read/write operations available
• Variable length delay bits; 21 to 5,048 bits (Cycle time: 25 ns)
15 to 5,048 bits (Cycle time: 35 ns)
• Power supply voltage VCC = 5.0 V ± 0.5 V
• Suitable for sampling one line of A3 size paper (16 dots/mm)
• All input/output TTL compatible
• 3-state output
• Full static operation; data hold time = infinity
Ordering Information
Part Number
µPD485505G-25
µPD485505G-35
R/W Cycle Time
25 ns
35 ns
Package
24-pin plastic SOP
(11.43 mm (450))
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability
and additional information.
Document No. M10059EJ7V0DSJ1 (7th edition)
Date Published December 2000 N CP(K)
Printed in Japan
The mark
shows major revised points.
©
1994,1996
