Engineering Bulletin
No.511R / Mar.2005
Aluminum Electrolytic Capacitors
@Endurance : 85C 2,000 hours
@Solvent-proof type except 350 to 450Vdc
@Pb-free design
?SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
-40 to +85C (6.3 to 400Vdc) -25 to +85C (450Vdc)
Rated Voltage Range
Capacitance Tolerance
Leakage Current
6.3 to 450Vdc
P20% (M)
6.3 to 100Vdc
I=0.03CV or 4MA, whichever is greater.
I=0.01CV or 3MA, whichever is greater.
(at 20C, 120Hz)
160 to 450Vdc
Time After 1minute
(at 20C after 1 minute) CV
(at 20C after 2 minutes) CV[1,000 I=0.1CV+40
CV>1,000 I=0.04CV+100
After 5minutes
I=0.03CV+15
I=0.02CV+25
(at 20C)
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (Vdc)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 350 to 400V 450V
tanE (Max.)
0.24
0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.08
0.20
0.24
When nominal capacitance exceeds 1,000MF, add 0.02 to the value above for each 1,000MF increase.
(at 20C, 120Hz)
Rated voltage (Vdc)
6.3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 350 to 400V 450V
Z(-25C)/Z(+20C)
16
2
2
2
2
2
2
3
6
4
3
Z(-40C)/Z(+20C)
(at 120Hz)
3
3
3
3
3
4
6
6
8
4
The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 2,000
hours at 85C.
Rated voltage
6.3 to 100Vdc
160 to 400Vdc
450Vdc
Capacitance change
[P20% of the initial value
[P20% of the initial value
[P20% of the initial value
D.F. (tanE)
[150% of the initial specified value [200% of the initial specified value [150% of the initial specified value
Leakage current
[The initial specified value
[The initial specified value
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1,000 hours at 85C without
voltage applied.
Rated voltage
6.3 to 100Vdc
160 to 400Vdc
450Vdc
Capacitance change
[P20% of the initial value
[P20% of the initial value
[P20% of the initial value
D.F. (tanE)
[150% of the initial specified value [200% of the initial specified value [200% of the initial specified value
Leakage current
[The initial specified value
[500% of the initial specified value [500% of the initial specified value
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
?DIMENSIONS [mm]
FP0.5
FD'
Fd
Sleeve(Black : PET)
FP0.5
@Terminal Code : E
L'
15min.
4min.
Vent
(except F5)
2
3
4
(F12.5 to F18)
5
0.5
2.0
6.3
0.5
2.5
10 12.5 16
8
0.6 0.6 0.6 0.8
3.5 5.0 5.0 7.5
FD+0.5max.
L+1.5max
18
0.8
7.5
Gas escape end seal
?PART NUMBERING SYSTEM
1
(F5 to F10)
fD
fd
F
fD'
L'
5
6
7
8
9
10
11
12
13
14
15
16
17
18
E SME AAA E AA AAA M AAA N
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 0.1MF:R10,10MF:100,100MF:101)
Lead forming·taping code
Terminal code
Voltage code (ex. 6.3V:6R3,35V:350,400V:401)
Series code
Category
Specifications in this bulletin are subject to change without notice.
NIPPON CHEMI-CON CORPORATION
1297
1