NUP4201MR6
Transient Voltage
Suppressors
ESD Protection Diodes with Low
Clamping Voltage
The NUP4201MR6 transient voltage suppressor is designed to
protect high speed data lines from ESD, EFT, and lighting.
Features
•
•
•
•
•
•
•
Low Clamping Voltage
Stand−Off Voltage: 5 V
Low Leakage
TSOP−6 is footprint compatible with SC−74, SC−59 6 Lead and
SOT−23 6 Lead
Protection for the Following IEC Standards:
IEC 61000−4−2 Level 4 ESD Protection
UL Flammability Rating of 94 V−0
Pb−Free Package is Available
TSOP−6 LOW CAPACITANCE
DIODE TVS ARRAY
500 WATTS PEAK POWER
6 VOLTS
PIN CONFIGURATION
AND SCHEMATIC
I/O 1
6 I/O
VN 2
5 VP
I/O 3
Typical Applications
•
•
•
•
http://onsemi.com
4 I/O
High Speed Communication Line Protection
USB 1.1 and 2.0 Power and Data Line Protection
Digital Video Interface (DVI)
Monitors and Flat Panel Displays
6
1
TSOP−6
CASE 318G
PLASTIC
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Value
Unit
Peak Power Dissipation
8 x 20 mS @ TA = 25°C (Note 1)
Ppk
500
W
Operating Junction Temperature Range
TJ
−40 to +125
°C
Storage Temperature Range
Tstg
−55 to +150
°C
Lead Solder Temperature −
Maximum (10 Seconds)
NUP4201MR6T1
NUP4201MR6T1G
TL
235
260
°C
°C
Human Body Model (HBM)
Machine Model (MM)
IEC 61000−4−2 Air (ESD)
IEC 61000−4−2 Contact (ESD)
ESD
16000
400
20000
20000
V
IEC 61000−4−4 (5/50 ns)
EFT
40
A
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. Non−repetitive current pulse per Figure 5 (Pin 5 to Pin 2)
September, 2009 − Rev. 5
63
G
G
63 = Specific Device Code
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
*Date Code orientation may vary
depending upon manufacturing location.
ORDERING INFORMATION
Device
NUP4201MR6T1
NUP4201MR6T1G
Package
Shipping
TSOP−6
3000/Tape & Reel
TSOP−6 3000/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
See Application Note AND8308/D for further description of
survivability specs.
© Semiconductor Components Industries, LLC, 2009
MARKING DIAGRAM
M
Symbol
1
Publication Order Number:
NUP4201MR6/D