HOME在庫検索>在庫情報

部品型式

MAX1496EAI

製品説明
仕様・特性

19-3166; Rev 0; 1/04 3.5- and 4.5-Digit, Single-Chip ADCs with LED Drivers The MAX1447/MAX1496/MAX1498 low-power, 3.5- and 4.5-digit, analog-to-digital converters (ADCs) with integrated light-emitting diode (LED) drivers operate from a single 2.7V to 5.25V power supply. They include an internal reference, a high-accuracy on-chip oscillator, and a multiplexed LED display driver. An internal charge pump generates the negative supply needed to power the integrated input buffers for single-supply operation. The ADC is configurable for either a ±2V or ±200mV input range and it outputs its conversion results to an LED. The MAX1496 is a 3.5-digit (±1999 count) device and the MAX1447/MAX1498 are 4.5-digit (±19,999 count) devices. The MAX1447/MAX1496/MAX1498 do not require external precision integrating capacitors, autozero capacitors, crystal oscillators, charge pumps, or other circuitry required with dual-slope ADCs (commonly used in panel meter circuits). These devices also feature on-chip buffers for the differential signal and reference input, allowing direct interface with high-impedance signal sources. In addition, they use continuous internal offset-calibration and offer >100dB rejection of 50Hz and 60Hz line noise. Other features include data hold and peak detection and overrange/underrange detection. The MAX1447 features on-demand enhanced offset calibration for improved offset performance. The MAX1447/MAX1498 are available in a 32-pin, 7mm ✕ 7mm TQFP package and the MAX1496 is available in 28-pin SSOP and 28-pin PDIP packages. All devices in this family operate over the -40°C to +85°C extended temperature range. Features ♦ High Resolution MAX1447/MAX1498: 4.5 Digits (±19,999 Count) MAX1496: 3.5 Digits (±1999 Count) ♦ Sigma-Delta ADC Architecture No Integrating Capacitors Required No Autozeroing Capacitors Required >100dB of Simultaneous 50Hz and 60Hz Rejection ♦ Selectable Input Range of ±200mV or ±2V ♦ Selectable Voltage Reference: Internal 2.048V or External ♦ Internal High-Accuracy Oscillator Needs No External Components ♦ Automatic Offset Calibration ♦ On-Demand Enhanced Offset Calibration (MAX1447) ♦ Operate from a Single 2.7V to 5.25V Supply ♦ Low Power (Exclude LED-Driver Current) Maximum 744µA Operating Current (MAX1496) Maximum 960µA Operating Current (MAX1447/MAX1498) Maximum 325µA Shutdown Current ♦ Multiplexed Common-Cathode LED Drivers Resistor-Programmable Segment Current ♦ Small 32-Pin, 7mm x 7mm TQFP Package (4.5 Digits), 28-Pin SSOP Package (3.5 Digits) ♦ Also Available in a PDIP Package (3.5 Digits) Applications Ordering Information Digital Panel Meters PART Digital Voltmeters MAX1447ECJ -40°C to +85°C 32 TQFP 4.5 Digital Multimeters MAX1496EAI* -40°C to +85°C 28 SSOP 3.5 MAX1496EPI -40°C to +85°C 28 PDIP 3.5 MAX1498ECJ -40°C to +85°C 32 TQFP 4.5 Pin Configurations appear at end of data sheet. TEMP RANGE PINRESOLUTION PACKAGE (DIGITS) Hand-Held Meters *Future product—contact factory for availability. ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. 1 MAX1447/MAX1496/MAX1498 General Description

ブランド

MAXIM

会社名

Maxim Integrated

本社国名

U.S.A

事業概要

アナログおよびミックスドシグナル半導体製品を設計、製造、販売している米国系の株式会社である。 マキシム・インテグレーテッドは、工業、通信、民生、コンピューティングの各市場向けに集積回路を開発しています

供給状況

 
Not pic File
お探しのMAX1496EAIは、clevertechの営業スタッフが在庫調査を行いメールにて結果を御報告致します。

「見積依頼」をクリックして どうぞお問合せ下さい。

お支払方法

宅配業者の代金引換又は商品到着後一週間以内の銀行振込となります。


お取引内容はこちら

0.0574538708