GP1A73AJ000F
GP1A73AJ000F
Gap : 5mm Slit : 0.5mm
*OPIC Output,
Snap-in type
Transmissive Photointerrupter with
Connector
■ Description
■ Agency approvals/Compliance
GP1A73AJ000F is a standard, OPIC output, transmissive photointerrupter with opposing emitter and detector
in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a
case, and a 3-pin connector is included to allow remotemount or off-board designs.
1. Compliant with RoHS directive
■ Applications
1. General purpose detection of object presence or motion.
2. Example : PPC, FAX, Printer
■ Features
1. Transmissive with OPIC output
2. Highlights :
• Special position hooks compatible with 3 different
plate thicknesses (1.0, 1.2, 1.6mm)
• Hinged snap insertion
3. Key Parameters :
• Gap Width : 5mm
• Slit Width (detector side): 0.5mm
• Package : 17×12.8×8mm (without connector and
hooks)
• Connector : Tyco Electronics AMP K.K. (PN : 292133-3)
or SUMIKO TEC CO., LTD.
(PN : GH4A003P000ZA)
• Output Type : High when the object is present with
Pullup Resistor.
4. Lead free and RoHS directive compliant
* "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signalprocessing
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1
Sheet No.: D3-A04601EN
Date Oct. 3. 2005
© SHARP Corporation