ALUMINUM ELECTROLYTIC CAPACITORS
AD
Snap-in Terminal Type, 105°C Withstanding Overvoltage series
series
Withstanding 3000 hours application of rated ripple current at 105°C.
Suited for 100V/200V switch-over use in switching power supplies.
Withstanding overvoltage and suited for IEC-60950 application.
Compliant to the RoHS directive (2002/95/EC).
AD
Products which are scheduled to be discontinued.
Not recommended for new designs
Withstandard
overvoltage
GU
a
Specifications
Performance Characteristics
Item
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Tangent of loss angle (tan δ)
– 40 to +105°C
250V
82 to 1200µF
± 20% at 120Hz, 20°C
I 3 CV ( µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)]
0.15MAX. 120Hz,20°C
Rated voltage(V)
Z – 25°C/Z+20°C
Z – 40°C/Z+20°C
Stability at Low Temperature
Measurement frequency:120Hz
250
3
12
Impedance ratio ZT/Z20 (MAX.)
Endurance
The specifications listed at right shall be met when the capacitors
are restored to 20°C after D.C. bias plus rated ripple current is
applied for 3000 hours at 105°C, the peak voltage shall not exceed
the rated voltage.
Capacitance change
tan δ
Leakage current
Within ±20% of the initial capacitance value
200% or less than the initial spesified value
Less than or equal to the initial specified value
Shelf Life
After storing the capacitors under no load at 105°C for 1000 hours
and then performing voltage treatment based on JIS C 5101-4 clause
4.1 at 20°C, they shall meet the requirements listed at right.
Capacitance change
tan δ
Leakage current
Within ±15% of the initial capacitance value
150% or less than the initial spesified value
Less than or equal to the initial specified value
Withstand excess voltage
Marking
Not defective after 7 hours continuous charges of 360VDC at 70°C atmosphere.
Printed with white color letter on black sleeve.
Type numbering system (Example : 250V 560 µF)
Drawing
1
Polarity bar
Sleeve (P.E.T.)
0.8+0.2
-0.1
5
6
7
8
9
10 11
12
.2
+0 .1
-0
Case dia. code
0.8
4.0±0.5
L±2
4
Configuration
φD
Code
Capacitance tolerance (±20%)
20
Y
10±
0.1
10
Rated capacitance (560µF)
(PC board hole dimensions)
22
Z
25
A
Rated voltage (250V)
30
B
Series name
1.5 +0.2
-0.1
4.0±0.5
Pressure relief vent
3
2.5
φD +1MAX.
2 - φ 2.0 ±0.1
2
L AD 2 E 5 6 1 ME L A
35
C
(Terminal dimensions)
Type
The other terminal is also available upon request.
Please refer page 265 for schematic of dimensions.
Dimensions
250V (2E)
25
V(Code)
Code
Cap.(µF)
0082
0100
0120
0150
0180
0220
0270
0330
0390
0470
0560
0680
0820
1000
1200
φD
820
101
121
151
181
221
271
331
391
471
561
681
821
102
122
20
20 × 20
20 × 25
20 × 25
20 × 30
20 × 35
20 × 40
20 × 45
20 × 50
22
0.42
0.53
0.65
0.79
0.90
1.00
1.15
1.30
22 × 20
22 × 25
22 × 25
22 × 25
22 × 30
22 × 35
22 × 40
22 × 45
0.53
0.65
0.79
0.90
1.00
1.15
1.30
1.49
Frequency coefficient of rated ripple current
Frequency (Hz)
Coefficient
50
0.81
60
0.85
120
1.00
300
1.17
1k
1.32
10k
1.45
50k or more
1.50
25 × 20
25 × 25
25 × 25
25 × 25
25 × 30
25 × 35
25 × 40
25 × 45
25 × 50
30
0.65
0.79
0.90
1.00
1.15
1.30
1.49
1.65
1.80
30 × 20
30 × 25
30 × 25
30 × 25
30 × 30
30 × 35
30 × 40
30 × 45
30 × 50
35
0.90
1.00
1.15
1.30
1.49
1.65
1.80
2.00
2.30
35 × 20
35 × 25
35 × 25
35 × 25
35 × 30
35 × 35
35 × 40
35 × 45
35 × 50
Case size
φ D × L (mm)
1.15
1.30
1.49
1.65
1.80
2.00
2.30
2.47
2.60
Rated
ripple
Rated ripple current (Arms) at 105°C 120Hz
Minimum order quantity : 50pcs.
CAT.8100Y