MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
SRG
Series
Low profile, 85℃
SRG
●Low
profile :φ4×7mm toφ18×25mm
: 1,000 to 2,000 hours at 85℃
●Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
●RoHS Compliant
Downsized
●Endurance
SRA
Downsized
Low profile
SMG
◆SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
-40 to +85℃
Rated Voltage Range
Capacitance Tolerance
Leakage Current
4 to 50Vdc
±20% (M)
(at 20℃, 120Hz)
I=0.01CV or 3µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20℃ after 2 minutes)
4V 6.3V 10V 16V 25V 35V 50V
Rated voltage (Vdc)
0.38 0.28 0.24 0.20 0.16 0.14 0.12
tanδ(Max.)
When nominal capacitance exceeds 1,000µF, add 0.03 to the value above for each 1,000µF increase.
(at 20℃, 120Hz)
4V
6.3V 10V 16V 25V 35V 50V
Rated voltage (Vdc)
6
5
4
3
2
2
2
Z(-25℃)/Z(+20℃)
12
12
10
8
5
4
3
Z(-40℃)/Z(+20℃)
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000 hours
(1,000 hours forφ8 and smaller) at 85℃.
≦±20% of the initial value
Capacitance change
≦200% of the initial specified value
D.F. (tanδ
)
≦The initial specified value
Leakage current
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 85℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
≦±20% of the initial value
D.F. (tanδ
)
≦200% of the initial specified value
Leakage current
≦The initial specified value
Dissipation Factor
(tan )
δ
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
◆DIMENSIONS [mm]
F±0.5
φd
φD'
F±0.5
Code : E
Sleeve (PET : Black)
F±0.5
●Terminal
or
L'
15min.
4min.
Vent
(φ and larger)
10
( 4 to φ10)
φ
12.5 to φ18)
(φ
Gas escape end seal
10 & 12.5 16 & 18
8
6.3
4
5
φD
7L 0.45 0.45 0.45 0.45
0.5 0.5 0.6
0.6
0.8
≧9L 5.0
7.5
F
1.5 2.0 2.5 3.5
φD '
φD+0.5max.
L'
L+1.5max. (7L : L+1.0max.)
φd
◆PART NUMBERING SYSTEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
E S RG AAA E AA AAA M AAA D
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 100µF:101, 2,200µF:222)
Lead forming·taping code
Terminal code
Voltage code (ex. 6.3V:6R3, 35V:350, 50V:500)
Series code
Category
Please refer to "Product code guide (radial lead type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
(1/2)
CAT. No. E1001M