HOME在庫検索>在庫情報

部品型式

AD815ARB

製品説明
仕様・特性

a High Output Current Differential Driver AD815 FUNCTIONAL BLOCK DIAGRAM FEATURES Flexible Configuration Differential Input and Output Driver or Two Single-Ended Drivers Industrial Temperature Range High Output Power Thermally Enhanced SOIC 400 mA Minimum Output Drive/Amp, RL = 10 ⍀ Low Distortion –66 dB @ 1 MHz THD, RL = 200 ⍀, V OUT = 40 V p-p 0.05% and 0.45؇ Differential Gain and Phase, R L = 25 ⍀ (6 Back-Terminated Video Loads) High Speed 120 MHz Bandwidth (–3 dB) 900 V/␮s Differential Slew Rate 70 ns Settling Time to 0.1% Thermal Shutdown APPLICATIONS ADSL, HDSL, and VDSL Line Interface Driver Coil or Transformer Driver CRT Convergence and Astigmatism Adjustment Video Distribution Amp Twisted Pair Cable Driver GENERAL DESCRIPTION The AD815 consists of two high speed amplifiers capable of supplying a minimum of 500 mA. They are typically configured as a differential driver enabling an output signal of 40 V p-p on ± 15 V supplies. This can be increased further with the use of a coupling transformer with a greater than 1:1 turns ratio. The low harmonic distortion of –66 dB @ 1 MHz into 200 Ω NC 1 24 NC NC 2 23 NC NC 3 22 NC NC 4 5 THERMAL HEAT TABS +VS* 21 NC AD815 20 6 TOP VIEW 19 7 (Not to Scale) 18 8 THERMAL HEAT TABS +VS* 17 +IN1 9 16 +IN2 –IN1 10 15 –IN2 OUT1 11 14 OUT2 –VS 12 13 +VS NC = NO CONNECT *HEAT TABS ARE CONNECTED TO THE POSITIVE SUPPLY. combined with the wide bandwidth and high current drive make the differential driver ideal for communication applications such as subscriber line interfaces for ADSL, HDSL and VDSL. The AD815 differential slew rate of 900 V/µs and high load drive are suitable for fast dynamic control of coils or transformers, and the video performance of 0.05% and 0.45° differential gain and phase into a load of 25 Ω enable up to 12 back-terminated loads to be driven. The 24-lead SOIC (RB) is capable of driving 26 dBm for full rate ADSL with proper heat sinking. +15V 1/2 AD815 100⍀ TOTAL HARMONIC DISTORTION – dBc –40 –50 VS = ؎15V G = +10 VOUT = 40V p-p AMP1 499⍀ –60 VIN = 4Vp-p 110⍀ –70 –80 R1 = 15⍀ G = +10 RL 120⍀ VD = 40Vp-p VOUT = 40Vp-p 499⍀ RL = 50⍀ (DIFFERENTIAL) 100⍀ 1/2 AD815 RL = 200⍀ (DIFFERENTIAL) –90 R2 = 15⍀ AMP2 1:2 TRANSFORMER –15V –100 Figure 2. Subscriber Line Differential Driver –110 100 1k 10k 100k FREQUENCY – Hz 1M 10M Figure 1. Total Harmonic Distortion vs. Frequency REV. C Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 www.analog.com Fax: 781/461-3113 © 2005 Analog Devices, Inc. All rights reserved.

ブランド

AD

会社名

Analog Devices

本社国名

U.S.A

事業概要

半導体デバイスを製造するアメリカの多国籍企業。特にADC、DAC、MEMS、DSPなどに強い。現在は 65nm から 3μm のプロセスルールの回路を設計している。

供給状況

 
Not pic File
お求め製品AD815ARBは、clevertechのスタッフが在庫確認を行いメールにて結果を御連絡致します。

「見積依頼」ボタンを押してお気軽にお問合せ下さい。

ご注文方法

弊社からの見積回答メールの返信又はFAXにてお願いします。


お取引内容はこちら

0.0629749298