FINAL
Am85C30
Enhanced Serial Communications Controller
DISTINCTIVE CHARACTERISTICS
s Fastest data rate of any Am8530
— 8.192 MHz / 2.048 Mb/s
— 10 MHz / 2.5 Mb/s
— 16.384 MHz / 4.096 Mb/s
s Low-power CMOS technology
s Pin and function compatible with other NMOS
and CMOS 8530s
s Easily interfaced with most CPUs
— Compatible with non-multiplexed bus
s Many enhancements over NMOS Am8530H
— Allows Am85C30 to be used more effectively in
high-speed applications
— Improves interface capabilities
s Two independent full-duplex serial channels
s Asynchronous mode features
— Programmable stop bits, clock factor, character
length and parity
— Break detection/generation
— Error detection for framing, overrun, and parity
s Synchronous mode features
Advanced
Micro
Devices
— Programmable CRC generators and checkers
— SDLC/HDLC support includes frame control,
zero insertion and deletion, abort, and residue
handling
s Enhanced SCC functions support high-speed
frame reception using DMA
—
—
—
—
14-bit byte counter
10 × 19 SDLC/HDLC Frame Status FIFO
Independent Control on both channels
Enhanced operation does not allow special
receive conditions to lock the 3-byte DATA
FIFO when the 10 × 19 FIFO is enabled
s Local Loopback and Auto Echo modes
s Internal or external character synchronization
s 2-Mb/s FM encoding transmit and receive
capability using internal DPLL for 16.384-MHz
product
s Internal synchronization between RxC to PCLK
and TxC to PCLK
— This allows the user to eliminate external synchronization hardware required by the NMOS
device when transmitting or receiving data at
the maximum rate of 1/4 PCLK frequency
— Supports IBM® BISYNC, SDLC, SDLC Loop,
HDLC, and ADCCP Protocols
GENERAL DESCRIPTION
AMD’s Am85C30 is an enhanced pin-compatible version of the popular Am8530H Serial Communications
Controller. The Enhanced Serial Communications
Controller (ESCC) is a high-speed, low-power, multiprotocol communications peripheral designed for use
with 8- and 16-bit microprocessors. It has two independent,full-duplex channels and functions as a serial-toparallel, parallel-to-serial converter/controller. AMD’s
proprietary enhancements make the Am85C30 easier
to interface and more effective in high-speed applications due to a reduction in software burden and the elimination of the need for some external glue logic.
The Am85C30 is easy to use due to a variety of sophisticated internal functions, including on-chip baud rate
generators, digital phase-locked loops, and crystal
oscillators, which dramatically reduce the need for external logic. The device can generate and check CRC
codes in any SYNC mode, and can be programmed to
check data integrity in various modes. The ESCC also
has facilities for modem controls in both channels. In applications where these controls are not needed, the modem controls can be used for general-purpose I/O.
This versatile device supports virtually any serial data
transfer application such as networks, modems, cassettes, and tape drivers. The ESCC is designed for nonmultiplexed buses and is easily interfaced with most
CPUs, such as 80188, 80186, 80286, 8080, Z80, 6800,
68000 and MULTIBUS™.
Publication# 10216 Rev. F
Issue Date: June 1993
Amendment /0
