CERAMIC CHIP/CAPACITORS
Tin Lead L Termination
FEATURES
KEMET’s line of Tin/Lead termination commercial MLCC surface mount capacitors are designed to meet the needs of the
commercial, high reliability, and military customer applications where Tin/Lead plating is required. KEMET’s Tin/Lead electroplating process is designed to meet a 5% minimum lead content in the termination of the component. As the bulk of the
electronics industry marches to RoHS compliance it is important that KEMET provide the Tin/Lead terminated products for
our valued high reliability and military customers.
KEMET Tin/Lead MLCC surface mount capacitors are available in standard EIA case sizes from 0402 to 2225 and standard
KEMET Tiin/Lead MLCC surface mount capacitors are availablerange from 6.3V to 200V. To order the Tin/Leadand standard
capacitance values in X7R and C0G dielectrics. Voltage ratings in standard EIA case sizes from 0402 to 2225 terminations
capacitance values in X7R, X5R, the part number. Voltage ratings L Series termination200V. To order the Tin/Lead termina- (Open
indicate an “L” in the 14th digit of C0G dielectrics. To request the range from 6.3V to for other surface mount product lines
tions indicate an “L” in the 14th digit of the part number. For additional dielectrics and voltage ratings please contact local Sales
Mode, High Voltage, Arrays, etc.) or for additional dielectrics and higher voltage ratings, please contact the factory or the factory or local Sales personnel.
representative.
CAPACITOR OUTLINE DRAWINGS
W
T
L
Sn/Pb PLATE
B
NICKEL PLATE
S
ELECTRODES
CONDUCTIVE METALLIZATION
DIMENSIONS—MILLIMETERS AND (INCHES)
T
THICKNESS
S
SEPARATION
minimum
EIA SIZE
CODE
METRIC
SIZE CODE
L - LENGTH
W - WIDTH
0201*
0603
0.6 (.024) ± .03 (.001)
0.3 ± (.012) ± .03 (.001)
0.15 (.006) ± .05 (.002)
N/A
0402*
1005
1.0 (.04) ± .05 (.002)
0.5 (.02) ± .05 (.002)
0.20 (.008) -.40 (.016)
0.3 (.012)
B - BANDWIDTH
0603
1608
1.6 (.063) ± .15 (.006)
0.8 (.032) ± .15 (.006)
0.35 (.014) ± .15 (.006)
2012
2.0 (.079) ± .20 (.008)
1.25 (.049) ± .20 (.008)
0.50 (.02) ± .25 (.010)
0.75 (.030)
1206*
3216
3.2 (.126) ± .20 (.008)
1.6 (.063) ± .20 (.008)
0.50 (.02) ± .25 (.010)
N/A
1210*
3225
3.2 (.126) ± .20 (.008)
2.5 (.098) ± .20 (.008)
1808
4520
4.5 (.177) ± .30 (.012)
2.0 (.079) ± .20 (.008)
Solder Reflow
0.7 (.028)
0805*
MOUNTING
TECHNIQUE
0.50 (.02) ± .25 (.010)
N/A
0.60 (.024) ± .35 (.014)
N/A
N/A
1812
4532
4.5 (.177) ± .30 (.012)
3.2 (.126) ± .30 (.012)
0.60 (.024) ± .35 (.014)
1825*
4564
4.5 (.177) ± .30 (.012)
6.4 (.252) ± .40 (.016)
0.60 (.024) ± .35 (.014)
N/A
2220
5650
5.6 (.220) ± .40 (.016)
5.0 (.197) ± .40 (.016)
0.60 (.024) ± .35 (.014)
N/A
2225
5664
5.6 (.220) ± .40 (.016)
6.3 (.248) ± .40 (.016)
0.60 (.024) ± .35 (.014)
N/A
Solder Reflow
* Note: Indicates EIA Preferred Case Sizes (Tightened tolerances apply for 0402, 0603, and 0805 packaged in bulk cassette, see page 96.)
† For extended value 1210 case size – solder reflow only.
CAPACITOR ORDERING INFORMATION (Standard Chips - For
Military see page 87)
C 0805 C 103 K 5 R A L*
CERAMIC
SIZE CODE
SPECIFICATION
C - Standard
CAPACITANCE CODE
Expressed in Picofarads (pF)
First two digits represent significant figures.
Third digit specifies number of zeros. (Use 9
for 1.0 through 9.9pF. Use 8 for 0.5 through 0.99pF)
(Example: 2.2pF = 229 or 0.50 pF = 508)
CAPACITANCE TOLERANCE
B – ±0.10pF J – ±5%
C – ±0.25pF K – ±10%
D – ±0.5pF
M – ±20%
F – ±1%
G – ±2%
* Part Number Example: C0805C103K5RAL
END METALLIZATION
L - SnPb plated nickel barrier
(SnPb 5% minimum)
FAILURE RATE LEVEL
A- Not Applicable
TEMPERATURE CHARACTERISTIC
Designated by Capacitance
Change Over Temperature Range
G – C0G (NP0) (±30 PPM/°C)
R – X7R (±15%) (-55°C + 125°C)
P – X5R (±15%) (-55°C + 85°C)
VOLTAGE
1 - 100V
3 - 25V
2 - 200V
4 - 16V
5 - 50V
8 - 10V
9 - 6.3V
6 - 35V
(14 digits - no spaces)
Refer to pages 73-76 for NP0/C0G, X7R and X5R dielectric capacitance ranges available.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
77
Ceramic Surface Mount
See page 78
for thickness
dimensions.
Solder Wave +
or
Solder Reflow
