DATA SHEET
PHOTOCOUPLER
PS9817A-1,-2
HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE
8-PIN SSOP (SO-8)
−NEPOC
HIGH-SPEED PHOTOCOUPLER
Series−
DESCRIPTION
The PS9817A-1 and PS9817A-2 are active-low type high-speed photocouplers that use a GaAlAs light-emitting
diode on the input side and a photodetector IC that includes a photodiode and a signal processor on the same chip on
the output side.
The PS9817A-1 and PS9817A-2 are designed specifically for high common mode transient immunity (CMR) and
low pulse width distortion. The PS9817A-2 is suitable for high density applications.
FEATURES
PIN CONNECTION
• Pulse width distortion (⏐tPHL−tPLH⏐ = 35 ns MAX.)
(Top View)
• High common mode transient immunity (CMH, CML = ±15 kV/μs MIN.)
8
1
PS9817A-1
6 5
1. NC
2. Anode
3. Cathode
4. NC
5. GND
6. VO
7. NC
8. VCC
3 4
7
2
• High-speed (10 Mbps)
• High isolation voltage (BV = 2 500 Vr.m.s.)
• Open collector output
• Ordering number of tape product : PS9817A-1-F3: 1 500 pcs/reel
: PS9817A-2-F3: 1 500 pcs/reel
• Pb-Free product
• Safety standards
8
7
1
• UL approved: File No. E72422
2
SHIELD
• DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40008347 (Option)
APPLICATIONS
• Measurement equipment
• PDP
PS9817A-2
6 5
1. Anode1
2. Cathode1
3. Cathode2
4. Anode2
5. GND
6. VO2
7. VO1
8. VCC
3 4
SHIELD
• 40% reduction of mounting area (5-pin SOP × 2)
• FA Network
TRUTH TABLE
LED
Output
ON
L
OFF
H
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. PN10647EJ03V0DS (3rd edition)
Date Published August 2008 NS
Printed in Japan
The mark shows major revised points.
The revised points can be easily searched by copying an "" in the PDF file and specifying it in the "Find what:" field.
2006, 2008