DIN Twin-contact Connectors
XC5
A Wide Variety of DIN Connectors That
Conform to UL/CSA Standards.
■ Fully preserve the characteristics of normal DIN connectors while increasing the number of terminals available.
■ A wide product range to fit almost any application.
■ Meeting world market needs with products ranging from
one-piece connectors (card edge) to two-piece connectors.
■ Use the twin-contact system for high reliability and low
cost.
■ Lower insertion force as a result of FEM analysis techniques.
■ Mates with OMRON's XC6-series connectors.
■ Conform to UL standards (file no. E103202) and
CSA standards (file no. LR 62678).
RoHS Compliant
■ Ratings and Characteristics
Rated current
300 VAC
Contact resistance
20 mΩ max. (at 20 mV, 100 mA max.)
Item
2A
Rated voltage
■ Materials and Finish
Insulation resistance 106 MΩ min. (at 100 VDC)
Dielectric strength
0.59 N max. per contact
Removal force
Fiber-glass reinforced PBT resin (UL94V-0)/gray
Contacts Mating
end
Brass/nickel base,
0.4-µm gold plating
(See note 1.)
Phosphor bronze/nickel
base, 0.4-µm gold plating
(See note 1.)
Brass/nickel base,
2.0-µm tin plating
Phosphor bronze/nickel
base, 2.0-µm tin plating
0.15 N min. (with test gauge, t = 0.56 mm)
Insertion durability
200 times
Ambient operating
temperature
Operating: −55 to 125°C (with no icing)
Sockets
Housings
1,000 VAC for 1 min (leakage current:
1 mA max.)
Total insertion force
Plugs
(See note 2.)
Terminal
Note:
1. For non-standard plating specifications, contact your OMRON
representative.
2. Wrap terminal contacts are made from phosphor bronze.
■ Applicable Wrap Post Wire Sizes
AWG30, AWG28, AWG26, or AWG24
(Solid wire: 0.25 to 0.51 mm dia.)
■ Wrap Post Length
3 wires
1