Available at Digi-Key
www.digikey.com
5x7mm
Precision TCXO
Model D75F
Description:
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630- 851- 4722
Fax: 630- 851- 5040
www.conwin.com
US Headquarters:
630-851-4722
European Headquarters:
+353-61-472221
Features:
The Connor-Winfield’s D75F is a 5x7mm
Surface Mount Temperature Compensated
Crystal Controlled Oscillator (TCXO) with a
Tri-State LVCMOS output. Through the use of
Analog Temperature Compensation, the D75F
is capable of holding sub 1-ppm stabilities over
the 0 to 70°C temperature range.
• 3.3 Vdc Operation
• LVCMOS Output
• Frequency Stability: ± 0.50 ppm
• Temperature Range: 0 to 70°C
• Low Jitter <1ps RMS
• Tri-State Enable/Disable Function
• 5x7mm Surface Mount Package
• Tape and Reel Packaging
• RoHS Compliant / Pb Free
D7
5
27 F 11
4
.0
MH 4
Z
Absolute Maximum Ratings
Parameter
Minimum
Nominal
Maximum
Units
-55
-0.5
-0.5
Storage Temperature
Supply Voltage (Vcc)
Input Voltage
-
-
-
85
6.0
Vcc+0.5
°C
Vdc
Vdc
Maximum
Units
Notes
Operating Specifications
Parameter
Minimum
Nominal Frequency (Fo)
Frequency Calibration @ 25 °C
Frequency Stability vs. Temperature
Frequency vs. Load Stability
Frequency vs. Voltage Stability
Static Temperature Hysteresis
Aging
Operating Temperature Range:
Supply Voltage (Vcc)
Supply Current (Icc)
Period Jitter
Integrated Phase Jitter
SSB Phase Noise ( Fo = 19.44 MHz)
@ 10Hz offset
@ 100Hz offset
@ 1KHz offset
@ 10KHz offset
@ 100KHz offset
Start-up Time
Nominal
- 13.0, 19.44, 25.0 or 27.0
-1.0
-
-0.5
-
-0.2
-
-0.2
-
-
-
-1.0
-
0
-
3.135
3.3
-
-
-
3
-
0.5
-
-
-
-
-
-
-
1.0
0.5
0.2
0.2
0.4
1.0
70
3.465
6
5
1.0
-80
-110
-135
-150
-150
-
-
-
-
-
-
10
Notes
MHz
ppm 1
ppm 2
ppm ±5%
ppm ±5%
ppm 3
ppm/year
°C
Vdc ±5%
mA
ps rms
ps rms 4
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
ms
Enable / Disable Input Characteristics (Pad 8)
Parameter
Minimum
Enable Voltage (High)
Disable Voltage (Low)
Nominal
Maximum
70%Vcc
-
-
-
30%Vcc
Units
Notes
Vdc
Vdc
5
5
LVCMOS Output Characteristics
Parameter
Minimum
Load
Voltage (High) (Voh)
(Low)
(Vol)
Duty Cycle at 50% of Vcc
Rise / Fall Time 10% to 90%
Nominal
Maximum
-
90%Vcc
-
45
-
15
-
-
50
-
-
-
10%Vcc
55
8
Units
Notes
pF
Vdc
Vdc
%
ns
6
Package Characteristics
Package
Vibration:
Shock:
Soldering Process;
Notes:
Bulletin
Page
Revision
Date
Tx237
1 of 2
03
03 Dec 2013
Hermetically sealed crystal mounted on a ceramic package
Environmental Characteristics
Vibration per Mil Std 883E Method 2007.3 Test Condition A
Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B.
RoHS compliant lead free. See soldering profile on page 2.
Ordering Information
D75F-13.0M, D75F-19.44M, D75F-25.0M or D57F-027.0M
1. Initial calibration @ 25°C. Specifications at time of shipment after 48 hours of operation.
2. Frequency stability vs. change in temperature. [±(Fmax - Fmin)/(2*Fo)].
3. Frequency change after reciprocal temperature ramped over the operating range. Frequency measured before and after at 25°C.
4. BW = 12 KHz to 20 MHz.
5. Leave Pad 8 unconnected if enable / disable function is not required. When tri-stated, the output stage is disabled but the oscillator and compensation circuit are still
active (current consumption < 1 mA).
6. For best performance it is recommended that the circuit connected to this output should have an equivalent input capacitance of 15pF.
