VJ Non-Magnetic Series
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for Non-Magnetic Applications
FEATURES
•
•
•
•
•
•
•
•
•
Specialty: Non-magnetic MLCCs
Manufactured with non-magnetic materials
Safety screened for magnetic properties
C0G (NP0) and X7R/X5R dielectrics offered
Wide range of case sizes, voltage ratings and
capacitance values
Allowed assembly methods are conductive epoxy bonding
and IR reflow
Wet built process
Reliable Noble Metal Electrode (NME) system
Material categorization: For definitions please see
www.vishay.com/doc?99912
APPLICATIONS
•
•
•
•
•
•
•
Magnetic Resonance Imaging (MRI)
Medical test and diagnostic equipment
High Rel medical systems
High Rel aviation systems
Laboratory analysis systems
Navigation and electronic test equipment
Audio amplifiers
ELECTRICAL SPECIFICATIONS
NON-MAGNETIC C0G (NP0)
NON-MAGNETIC X7R/X5R
GENERAL SPECIFICATION
GENERAL SPECIFICATION
Note
Electrical characteristics at + 25 °C unless otherwise specified
Note
Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 125 °C
Operating Temperature: - 55 °C to + 125 °C
Capacitance Range: 0.5 pF to 56 nF
Capacitance Range: 100 pF to 6.8 μF
Voltage Range: 10 VDC to 3000 VDC
Voltage Range: 6.3 VDC to 3000 VDC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C
Temperature Coefficient of Capacitance (TCC):
X5R: ± 15 % from - 55 °C to + 85 °C, with 0 VDC applied
X7R: ± 15 % from - 55 °C to + 125 °C, with 0 VDC applied
Dissipation Factor (DF):
0.1 % maximum at 1.0 VRMS and
1 MHz for values 1000 pF
0.1 % maximum at 1.0 VRMS and
1 kHz for values > 1000 pF
Dissipation Factor (DF):
6.3 V, 10 V ratings: 5 % maximum at 1.0 VRMS and 1 kHz
16 V, 25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz
50 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz
Insulating Resistance:
At + 25 °C 100 000 M min. or 1000 F whichever is less
At + 125 °C 10 000 M min. or 100 F whichever is less
Insulating Resistance:
At + 25 °C 100 000 M min. or 1000 F whichever is less
At + 125 °C 10 000 M min. or 100 F whichever is less
Aging: 0 % maximum per decade
Aging Rate: 1 % maximum per decade
Dielectric Strength Test:
Performed per method 103 of EIA 198-2-E.
Applied test voltages
200 VDC-rated:
250 % of rated voltage
200 % of rated voltage
500 VDC-rated:
630 VDC, 1000 VDC-rated:
150 % of rated voltage
1500 VDC to 3000 VDC-rated:
120 % of rated voltage
Dielectric Strength Test:
Performed per method 103 of EIA 198-2-E.
Applied test voltages
200 VDC-rated:
250 % of rated voltage
500 VDC-rated:
min. 150 % of rated voltage
630 VDC, 1000 VDC-rated:
150 % of rated voltage
120 % of rated voltage
1500 VDC, 3000 VDC-rated:
Revision: 08-Mar-12
Document Number: 45128
1
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000