Electric Double Layer Capacitors(Gold Capacitor)/EN
Surface Mount Type
Series: EN
n Feature
Country of Origin
1.Re-flow soldering method available (240°C)
2.Miniaturized : Diaφ6.8 x height 1.8mm max.
3.Longer life and environmentally friendly
Japan
n Recommended Applications
Memory cards(power supply to hold memory),
mobile phones, PDAs, digital cameras.
n Specifications
Category temp. range
-10 to +60°C
3.3 V .DC
0.2 F
10 µA MAX
Maximum Operating Voltage
Nominal Capacitance
Maximum Operating Current
Category temp. range(-10°C)
Capacitance change ±30% of initial measured value at +20°C
Internal resistance
<10 times of initial measured value at +20°C
Stability at low
temperature and high
temperature
Category temp. range(+60°C)
Capacitance change
Internal resistance
±30% of initial measured value at +20°C
< measured value at +20°C
After 500 hours application of 3.3V. DC at +60°C, the capacitor shall meet the following limits.
Capacitance change ±30% of initial measured value
Internal resistance
< 20 times of initial specified value
After 500 hours storage at +60°C without load, the capacitor shall meet the specified limits
for Endurance.
Endurance
Shelf Life
After 500 hours storage at +40°C, 90 to 95% R.H., the capacitor shall meet the following
limits.
Capacitance change ±30% of initial measured value
Internal resistance
< 1 k ohm or less
High temperature
High humidity
n Dimensions in mm (not to scale)
Type A
Type RL
Type B
2.0±0.3
0.15±0.05
6.8 max.
1.4±0.2
6.8max.
0.5±0.1
6.8 max.
0.5±0.1
0.15±0.05
1.9±0.4
1.8max.
1.9±0.4
0.15±0.05
10.0max.
12.5max.
5.9±0.1
11.3±0.3
6.8 max.
2.5±0.3
1.4±0.3
1.9±0.2
2±0.3
0.5±0.1
2±0.3
1.8max.
1.8max.
n Standard Products
Maximum Operating Voltage
(V.DC)
3.3
Capacitance
Capacitance
range
(F)
(F)
0.2
0.16 to 0.36
Internal
resistance
Min. Packaging
QTY
Mass
Part number
(Ω) at 1kHz
(g)
200
0.2 (Approx.)
Reel (pcs)
EECEN0F204( )
2000
The re-flow condition / taping dimensions are explained on p.205 of our Catalog.
Please use it as a reference guide.
( ): Please use A,B or RL to indicate terminal type.
Note: 1.When the capacitor is being used in a high temperature and high humidity environment for a long period,
brown deposited materials might be found around the sealing area. However, the materials are insulators
and will not affect any electrical characteristcs of the capacitor.
2.Do not use reflow soldering when cell voltage is above 0.3V.
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately.
Mar. 2005
— EE200 —
