AXK7, 8
NARROW-PITCH
CONNECTORS FOR
BOARD-TO-BOARD
AND BOARD-TO-FPC
CONNECTION
NARROW PITCH
(0.4mm) CONNECTORS
P4 SERIES
FEATURES
1. 0.4 mm pitch and support for mated
heights of up to 1.5 mm, 2.0 mm, 2.5
mm, 3.0 mm, 3.5 mm, and 4.0 mm.
2. High impact-resistant construction.
1) Adoption of bellows-type contact
structure.
2) Guides are provided to take up any
position shift and facilitate insertion.
Insertion guide
The roll surfaces are in contact
with each other, providing high
contact reliability.
Socket and
header are
mated
Socket
Header
Since the contact is
formed by bending thin
plate, it has a spring-like
quality. This construction
helps make it resistant to
dropping and twisting.
3) The connector has a simple lock
mechanism.
2) It is constructed with impact dispersion
keys inside the body to disperse shocks
when dropped.
G What is Ni barrier construction?
By providing an exposed nickel part on the
gold (Au) plated contact, solder creeping is
prevented despite the ultra low profile.
Impact dispersion key
Ni barrier
Cu
Ni
Au
Header
Exposed
Ni part
Socket side contact
Cross section of
socket side contact
Note: Construction makes solder creeping difficult
because header side is formed at the same time.
G What is V notch construction?
By using the edge for the contacting part
and increasing contact pressure per unit
area, the effectiveness in removing flux
and contaminants is increased compared
to its predecessor. This is also effective in
preventing the trapping of contaminants.
[Cross section of contacting part]
Without notch
Socket side contact cross section
With V notch
Socket side
contact
Simple lock
mechanism
Socket
[Contact]
Header side contact
Header side
contact
A high level of shock resistance is
ensured by dispersing impact over the
four locations where the socket
indentations and header protrusions are
mated together.
Note: The following numbers of contacts
are not supported due to suction surface
factors.
• No retention fitting: 18 contacts or less
• With retention fitting: 22 contacts or less
3. Construction makes designing
devices easier.
1) The lower connector bottom surface
construction prevents contact and shorts
between the PCB and metal terminals.
This enables freedom in pattern wiring,
helping to make PCB’s smaller.
4. Design makes efficient mounting.
Features a terminal flatness of 0.08 mm,
construction resistant to creeping flux,
and design that facilitates visual
inspection of the soldered part.
5. Compliance with RoHS Directive
Environmentally friendly, the connectors
comply with Europe’s RoHS Directive.
Cadmium, lead, mercury, hexavalent
chromium, PBB and PBDE are not used.
6. Connectors for inspection available
Connectors for inspection are available
that are ideal for modular unit inspection
and inspection in device assembly
processes.
APPLICATIONS
Compact portable devices “Cellular
phones, DVC, Digital cameras, etc”
Ideal for Board-to-FPC connections
Before
mating
FPC
Narrow-pitch
connectors P4
After
mating
Header side contact cross section
The simple lock mechanism
ensures that the connector
clicks into position when it is
inserted for reliable singleaction insertion on the PCB.
Connector bottom: Create any thru-hole and pattern wiring.
All Rights Reserved (C) COPYRIGHT Matsushita Electric Works, Ltd.
Reinforcing plate
PCB
1.5mm
This enables the number of pins
to be doubled white the size remains the same as that for existing FPC connectors. This, in turn,
contributes to making products
and equipment more compact.