Aluminum Electrolytic Capacitors/ UP
Snap-in Type
Series: UP
n Features
Type :
TS
Country of Origin
Japan
Malaysia
U.S.A (ii)
Endurance: 85°C 2000 h
Length 20 mm
RoHS directive compliant
(ii) Regarding USA product,
,
Please check PEDCA s
Catalog.
n Recommended Applications
Smoothing circuits, AC adaptor,
n Specifications
Category temp. range
-40 to + 85°C
Rated W.V. Range
16 to 250 V .DC
120 to 68000 µ F
Nominal Cap. Range
-25 to + 85°C
315 to 450 V .DC
33 to 820 µ F
±20 % (120Hz/+20°C)
Capacitance Tolerance
3√CV (µA) max. after 5 minutes application of rated working voltage at +20°C.
C:Capacitance(µF) V: W.V. (V.DC)
Please see the attached standard products list
tan δ
Frequency (Hz)
50
60
100
120
500
1k
10k to
Frequency Correction
0.95
0.99
1.00
1.05
1.08
1.15
16 to 100V 0.93
Factor for Ripple Current Correction Factor
0.80
0.95
1.00
1.20
1.25
1.40
160 to 450V 0.75
After 2000 hours application of DC voltage with specified ripple current (< rated DC working
voltage) at +85°C, the capacitor shall meet the following limits.
Capacitance change ±20 % of initial measured value
Endurance
tan δ
< 200 % of initial specified value
DC leakage current < initial specified value
DC Leakage Current
After storage for 1000 hours at +85±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment)
Shelf Life
n Dimensions in mm (not to scale)
φD+1.0 max
Polarity bar
(10.0) 2-φ2.0±0.1
PET Sleeve
10.0±0.1
Vent
L+2.0 max
Recommended PWB piercing plan
4.0 ± 0.5
Terminal
+0.2
0.8 - 0.1
(t= 0.8)
(3.5)
4.0±0.5
2.0 max
Bottom of can
1.5 ± 0.2
Standard terminal type does not require
terminal trimming process.
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately.
Mar.2006
EE174
