DAC CONNECTOR
Disconnectable Crimp style Wire-to-wire connectors
Specifications –––––––––––––––––––
• Current rating: Signal circuit/ 1.5A AC, DC (AWG #27, #26)
Power supply circuit/ 6A AC, DC (AWG #18)
• Voltage rating: Signal circuit/ 50V AC, DC
Power supply circuit/ 300V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Applicable wire: Signal circuit Conductor size/ AWG #30 to #26
Power supply circuit Conductor size/ AWG #22 to #18
Plug side sheath O.D./ 5 to 8.2mm
• Number of circuits: Signal circuit/ 14 circuits
Power supply circuit/ 5 circuits
• Applicable PC board thickness: 1.0 to 2mm
• Mating/unmating life: 100 cycles
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Hybrid type I/O connector with combined
signal and power supply circuits.
• Signal circuit 1.0mm pitch lever-locking type
• Curtailment of number of component
• Space saving
• Locking mechanism
Standards ––––––––––––––––––––––
0
Recognized E60389
2 J50219161
22.8
43.6
Plug side
Signal line A/
Circuit No. 1
44.9
25
Signal line B/
Circuit No. 1
19.9
H JST
Power supply circuit/
Circuit No. 1
Signal line B/
Circuit No. 1
33
±0.1
33.2 ±0.1
2.2 ±0.2
10.3 ±0.2
17.4
5
5G
A ±0.05
Panel
thickness
A
dimension
t 1.0
t 1.2
30.2
t 1.6
t 2.0
4
26.6 ±0.2
9
18.3±0.2
A1
3
18.3
B1
2
+0.2
0
1.9
22 ±0.2
1
+0.2
0
Signal line A/
Circuit No. 1
Power supply circuit/
Circuit No. 1
Power supply circuit/
GND
30.4
Receptacle side
Note: 1. Punch holes in the panel according to the figures shown above. Burrs must be removed.
2. The strength of the panel must be considered when punching two or more holes.
3. The connector must be inserted from the same side as the hole is punched.
1