FEATURES
FUNCTIONAL BLOCK DIAGRAM
Bidirectional level translation
Operates from 1.15 V to 5.5 V
Low quiescent current < 5 µA
No direction pin
Qualified for automotive applications
VCCY
VCCA
A1
A2
Y3
A4
SPI, MICROWIRE level translation
Low voltage ASIC level translation
Smart card readers
Cell phones and cell phone cradles
Portable communications devices
Telecommunications equipment
Network switches and routers
Storage systems (SAN/NAS)
Computing/server applications
GPS
Portable POS systems
Low cost serial interfaces
Y2
A3
APPLICATIONS
Y1
Y4
EN
GND
04860-001
Data Sheet
Low Voltage, 1.15 V to 5.5 V, 4-Channel,
Bidirectional Logic Level Translator
ADG3304
Figure 1.
GENERAL DESCRIPTION
The ADG3304 is a bidirectional logic level translator that contains four bidirectional channels. It can be used in multivoltage
digital system applications, such as data transfer, between a low
voltage digital signal processing controller and a higher voltage
device using SPI and MICROWIRE interfaces. The internal
architecture allows the device to perform bidirectional logic
level translation without an additional signal to set the direction
in which the translation takes place.
The voltage applied to VCCA sets the logic levels on the A side of
the device, while VCCY sets the levels on the Y side. For proper
operation, VCCA must always be less than VCCY. The VCCA-compatible logic signals applied to the A side of the device appear as
VCCY-compatible levels on the Y side. Similarly, VCCY-compatible
logic levels applied to the Y side of the device appear as VCCAcompatible logic levels on the A side.
Rev. E
The enable pin (EN) provides three-state operation on both the
A side and the Y side pins. When the EN pin is pulled low, the
terminals on both sides of the device are in the high impedance
state. The EN pin is referred to the VCCA supply voltage and
driven high for normal operation.
The ADG3304 is available in compact 14-lead TSSOP, 12-ball
WLCSP, and 20-lead LFCSP. It is guaranteed to operate over
the 1.15 V to 5.5 V supply voltage range.
PRODUCT HIGHLIGHTS
1.
2.
3.
4.
Bidirectional level translation.
Fully guaranteed over the 1.15 V to 5.5 V supply range.
No direction pin.
Available in 14-lead TSSOP, 12-ball WLCSP, and 20-lead
LFCSP.
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2005–2016 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
