Keeper®
LTC-3PN
The LTC-3PN series is a perfect match for applications
which have little space but need a reliable, high energy
source. This cell is available in three (3) printed circuit
board (PCB) mounting configurations, with the
flexibility to be designed for any mounting geometry.
With 350 mAh packed into 0.0975 in2, these small
power sources will provide the solution for your
electronic packaging requirements.
LTC-3PN PRODUCT FEATURES
• Compliant with lead-free RoHS and WEEE
EC directives.
• Low profile, prismatic design.
• Stainless steel construction provides corrosion
resistance, hermetic seal and structural integrity.
• Years of low rate continuous use.
• Stand-by use with 80% capacity retention after
15 years at room temperature.
TYPICAL LTC-3PN DISCHARGE CHARACTERISTICS AT VARIED TEMPERATURES
3.9
3.8
3.7
3.6
3.5
3.4
3.3
3.2
3.1
3.0
2.9
2.8
2.7
2.6
2.5
1 mA
2
4 6
x 10
8
2
• Highly efficient utilization of valuable board space.
• Wave solderable (limit solder bath exposure to
a maximum of 5 seconds).
10 uA
4 6 8
2 4 6 8
2 4 6 8
x 100
x 1,000
x 10,000
DISCHARGE TIME (HOURS)
HIGH TEMPERATURE OPERATION AT 75°C
TEMPERATURE OPERATION AT 20°C
COLD TEMPERATURE OPERATION AT -20°C
• High energy density compared to other chemistries.
• No charging circuits required.
• Higher cell voltage allows for fewer cells and
high reliability.
DO YOU HAVE QUESTIONS
CONCERNING:
• What size battery you need?
• Flat discharge characteristics provide optimum
voltage regulation.
• What is passivation and its effects?
• Non-pressurized system allow for
high temperature usage.
• Any other technical question?
• Ship unrestricted. IATA No. UN3090.
• What is the maximum rate of this cell?
If so, call our Engineers at
1-800-201-0215 or 1-417-625-1116
for detailed technical information.
• Underwriters Laboratories recognized component.
LITHIUM-THIONYL CHLORIDE BATTERIES