Crimp
2.5mm
XM CONNECTOR High box type
Disconnectable Crimp style connectors (Board)
pitch
Features ––––––––––––––––––––––––
• Interchangeability
The housing is interchangeable with these of the XM receptacle
housing.
• Inner-housing lock
This inner-housing lock secures the plug to the receptacle and
prevents accidental disconnection. The lock is protected and
is not affected by external forces that might result from the
routing of wires.
• Secondary retainers
The secondary retainers enhance safety in case of partial
insertion or accidental release of the contact. Even if a contact
is inserted incompletely, the retainer guides the contact to the
proper position and securely locks it in place.
High-box type XM connector with 8.9mm
depth and 20.0mm height after assembly.
• Header for 2.5mm pitch XM connector
for use specifically with resin coated
("potted") PC boards
This header is tall and fully shrouded so as to prevent the resin
used to coat the PC board from coming into contact with the
mating pins.
6
5
ST
HJ
4
3
2
Fa
1
Specifications –––––––––––––––––––
• Current rating: 3A AC, DC (AWG #22, #20)
• Voltage rating: 250V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m Ω max.
After environmental testing/20m Ω max.
• Insulation resistance: 500M Ω min.
• Withstanding voltage: 1,000V AC/minute
• Applicable wire: AWG #28 to #20
• Applicable PC board thickness: 1.6mm
* RoHS compliant products are published.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
D8