HOME在庫検索>在庫情報

部品型式

DF7-10P-396DSA05

製品説明
仕様・特性

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TÜV Listed) DF7 Series Complete Locking Function Completely enclosed locking system Full barrier between adjacent contacts. Prevention of Incorrect Connections sFeatures 1. Complete Locking Function Reliable interior lock protects mated connectors from accidental disconnection. 2. Increased Contact Retention of Crimped Contacts and Prevention of Incomplete Insertion Separate contact retainer increases the contact retention, assures and visually confirms the complete contact insertion. 3. Molded-in Contact Retention Tabs Handling of terminated contacts during the assembly and termination is easier and avoids entangling of wires, since there are no protruding metal tabs. 4. Incorrect Insertion Prevention Guide post Connectors are polarized to assure correct mating with corresponding parts. 5.Solder Crack Prevention Board Eyelet mounting Glass reinforced resin is used in the pin header bodies to prevent solder cracks caused by the heat shrinkage. 6. Prevention of Incorrect Board Placement Built-in locating posts assure correct connector placement and orientation on the board.(2-12 pos.) 7. Supports Sealing after Installation. Sealing compound can be applied to the board installed connector for distance of 6 mm max. from the mounting surface (9 mm max. for single position). 8.Cost Effective Tooling The same crimping tools are used to terminate socket and pin contacts. 9. Prevention of Short Circuits between Adjacent Contacts Each contact is completely surrounded by the insulator housing, electrically isolating it from adjacent contacts. One pos. type can also be mounted to boards that have eyelets. Continued. B95

ブランド

HIROSE

会社名

ヒロセ電機株式会社

事業概要

コネクタを製造、販売。主力商品は携帯電話向けのコネクタで、ノキアやモトローラへも商品を納入している。

供給状況

 
Not pic File
お探しのDF7-10P-396DSA05は、当社営業STAFFが市場確認を行いemailにて結果を御報告致します。

「見積依頼」ボタンを押してお気軽にお問合せください。

ご注文方法

弊社からの見積回答メールの返信又はFAXにてお願いします。


お取引内容はこちら

0.0664689541