ALUMINUM ELECTROLYTIC CAPACITORS
PT
Miniature Sized, High Ripple Current, Long Life
series
PB
High ripple current.
Suited for ballast application.
Compliant to the RoHS directive (2002/95/EC).
Smaller
PT
Smaller
PZ
Specifications
Item
Performance Characteristics
Category Temperature Range
– 25 to +105°C
Rated Voltage Range
200 to 450V
Rated Capacitance Range
15 to 820µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current
After 2 minutes' application of rated voltage, leakage current is not more than 0.06CV+10 (µA)
Measurement frequency : 120Hz at 20°C
Tangent of loss angle (tan δ)
Rated voltage (V)
tan δ (MAX.)
200
0.12
220
0.12
250
0.12
400
0.15
420
0.20
450
0.20
Measurement frequency : 120Hz
Rated voltage (V)
Stability at Low Temperature
Impedance ratio ZT / Z20 (MAX.)
200
Z– 25°C / Z+20°C
220
250
400
420
450
3
3
3
8
8
8
Endurance
The specifications listed at right shall be met when the
capacitors are restored to 20°C after D.C. bias plus rated
ripple current is applied for 5000 hours at 105°C, the peak
voltage shall not exceed the rated voltage.
Shelf Life
After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C
5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Marking
Printed with white color letter on dark brown sleeve.
Within ± 20% of the initial capacitance value
200% or less than the initial specified value
Less than or equal to the initial specified value
Capacitance change
tan δ
Leakage current
Type numbering system (Example : 250V 220µF)
Radial Lead Type
1
Sleeve (P.E.T.)
2
3
4
5
6
7
8
9
10 11
12
U P T 2 E 2 2 1 M HD T
φd
Size code
Capacitance tolerance (± 20%)
φD+
P ± 0.5
MAX.
Configuration
Rated capacitance (220µF)
Rated voltage (250V)
Series name
Pressure
relief vent
L+
15 MIN
MAX.
4 MIN
Type
Configuration
φD
(mm)
φD
10
12.5
16
18
20
22
25
P
5.0
5.0
7.5
7.5
10.0
10.0
12.5
φd
0.6
0.6
0.8
0.8
1.0
1.0
0.5
0.5
0.5
0.5
1.0
PD
12.5 to 18
20 to 25
HD
RD
1.0
0.5
Pb-free leadwire
Pb-free PET sleeve
10
1.0
In case L > 25 for the φ12.5 dia. unit, lead dia. φ d = 0.8mm.
(φD < 20) : 1 .5
(φD
20) : 2 .0
• Please refer to page 20 about the end seal configulation.
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Dimension table in next page.
CAT.8100B
