PC957L0NSZ0F Series
PC957L0NSZ0F
Series
High Speed 1Mb/s, High CMR
DIP 8 pin ∗OPIC
Photocoupler
■ Description
■ Agency approvals/Compliance
PC957L0NSZ0F Series contains a LED optically
coupled to an OPIC chip.
It is packaged in a 8 pin DIP, available in SMT
gullwing lead-form option.
Input-output isolation voltage(rms) is 5.0 kV, High
speed response (TYP. 1Mb/s) and CMR is MIN.
15 kV/µs.
1. Recognized by UL1577 (Double protection isolation),
file No. E64380 (as model No. PC957L)
2. Approved by VDE, DIN EN60747-5-2 (∗) (as an
option), file No. 40008898 (as model No. PC957L)
3. Package resin : UL flammability grade (94V-0)
■ Features
■ Applications
1. 8 pin DIP package
2. Double transfer mold package
(Ideal for Flow Soldering)
3. High speed response
(tPHL : TYP. 0.2 µs, tPLH : TYP. 0.4 µs)
4. High noise immunity due to high instantaneous
common mode rejection voltage (CM H : MIN. 15
kV/µs, CML : MIN. −15 kV/µs)
5. High isolation voltage between input and output
(Viso(rms) : 5.0 kV)
6. Lead-free and RoHS directive compliant
1. Programmable controllers
2. Inverter
(∗)
DIN EN60747-5-2 : successor standard of DIN VDE0884
∗ "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-processing
circuit integrated onto a single chip.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1
Sheet No.: D2-A06402EN
Date Jun. 30. 2005
© SHARP Corporation