TANTALUM ELECTROLYTIC CAPACITORS
–55°C ~ +150°C
Rated voltage
DC10 ~ 35V
105°C
Surge voltage
DC13 ~ 45V
85°C
Derated voltage
DC6.3 ~ 22V
150°C
0.33 ~ 47µF
Capacitance tolerance
±10% or 20%
Leakage current
Features
The New THC series capacitor was developed based on the existing
high reliability TMCH series
(which is used in many Automobile applications) with an imploved
internal element and higher temperature resistance.
The operational temperature is up to 150℃ with derating voltage.
THC
Operating temperature range
(High reliability at High temperatature (up to 150℃Tantalum Chip Capacitors)
Product
specifications
Capacitance
THC Series
Refer to Standard product table
Paragraph 4.7, 120 Hz
Paragraph 4.9, in 5 minutes
Product symbol : (Example) THC Series E case 35V 10µF ±20%
THC E 1V 106 M T R F
after the rated voltage is
applied.
Terminal code
Packing polarity code
Packing method code (T:carrier tape)
Capacitance tolerance code
Capacitance code
Rated voltage code
Case size code
Type
Test conditions JIS C5101-1:1998
tanδ
Outline of drawings and dimensions
Refer to Standard product table
±10% or less
△C/C
Surge withstanding
tanδ
voltage
LC
Anode indication belf mark
L
Paragraph 4.8, 120Hz
Specified initial value or less
Paragraph 4.26
Specified initial value or less
–55
–
-10 ~ 0%
105
150
tanδ
0.04
0.04
0.06
0.08
Value shown table 0.06
0.06
0.08
0.10
H
W
Specified initial value
△C/C
E case
Temperature
characteristics
Paragraph 4.24
or less
a
a
a
W
A,B, C case
0 ~ +10% 0 ~ +20%
LC
0.005CV
or
0.25µA or less
—
0.10CV 0.125CV
or
or
5µA or less 6.25µA or less
△C/C
A
B
C
E
L±0.2
3.2
3.5
5.8
7.3
Case size
W±0.2
H±0.2
1.6
1.6
2.8
1.9
3.2
2.5
2.8
4.3±0.3
150% Specified initial value or less
±10% or less
tanδ
Specified initial value or less
125% Specified initial value or less
±10% or less
tanδ
Specified initial value or less
LC
200% Specified initial value or less
Standard value and case size
Capacitance
µF
0.33
0.47
0.68
1
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
Code
334
474
684
105
155
225
335
475
685
106
156
226
336
476
10
1A
Rated voltage (V.DC)
16
20
25
1C
1D
1E
35
1V
A
Thermal shock
Solder Dip
A,B case
10±1 sec.
Reflow–260°C
260±5°C
C,E, case
5±0.5 sec.
10±1 sec.
200% Specified initial value or less
△C/C
High-temperature
load
±10% or less
tanδ
LC
Moisture resistance
no load
Specified initial value or less
△C/C
a±0.2
1.2
2.2
2.2
2.4
R±0.3
0.7
0.8
1.3
1.3
Specified initial value or less
LC
Case
code
(Unit : mm)
tanδ
△C/C
Dimensions
±5% or less
LC
Solder heat
resistance
Paragraph 4.22, 85°C
85%RH, 1000hrs
85°C
The Rated voltage is applied
for 2000hrs
(Derated voltage in 150°C)
Leave at -55°C, normal
temperature, 150°C, and normal
temperature for 30 min., 3 min.,
30 min., and 3 min. Repeat this
operation 1000 times running.
A
△C/C
Moisture resistance
tanδ
load
LC
A
A
B
A
B
B
B
B
C
C
C/E
E
C
C
C/E
E
C
C
C/E
E
C
C
C/E
E
C
C
Failure rate
±10% or less
65°C, humidity 90 to 95%RH
150% Specified initial value or less
The rated voltage is applied
200% Specified initial value or less
for 500 hours.
0.5% / 1000hrs
85°C. The rated voltage is applied
(through a protective resistor of 1 Ω/V).
※This catalog is designed for providing general information. Please inquire
of our Sales Department to confirm specifications prior to use.
E
37
Hitachi AIC Inc.
