HOME在庫検索>在庫情報

部品型式

S29AL016J70TFI010

製品説明
仕様・特性

S29AL016J 16 Mbit (2 M x 8-Bit/1 M x 16-Bit), 3 V Boot Sector Flash Distinctive Characteristics Architectural Advantages Performance Characteristics  Single Power Supply Operation – Full voltage range: 2.7 to 3.6 volt read and write operations for battery-powered applications  High Performance – Access times as fast as 55 ns – Extended temperature range (–40°C to +125°C)  Manufactured on 110 nm Process Technology – Fully compatible with 200 nm S29AL016D  Ultra Low Power Consumption (typical values at 5 MHz) – 0.2 µA Automatic Sleep mode current – 0.2 µA standby mode current – 7 mA read current – 20 mA program/erase current  Secured Silicon Sector region – 128-word/256-byte sector for permanent, secure identification through an 8-word/16-byte random Electronic Serial Number accessible through a command sequence – May be programmed and locked at the factory or by the customer  Flexible Sector Architecture – One 16 Kbyte, two 8 Kbyte, one 32 Kbyte, and thirty-one 64 Kbyte sectors (byte mode) – One 8 Kword, two 4 Kword, one 16 Kword, and thirty-one 32 Kword sectors (word mode)  Cycling Endurance: 1,000,000 cycles per sector typical  Data Retention: 20 years typical Package Options  48-ball Fine-pitch BGA  64-ball Fortified BGA  Sector Group Protection Features – A hardware method of locking a sector to prevent any program or erase operations within that sector – Sectors can be locked in-system or via programming equipment – Temporary Sector Unprotect feature allows code changes in previously locked sectors  48-pin TSOP  Unlock Bypass Program Command – Reduces overall programming time when issuing multiple program command sequences  Erase Suspend/Erase Resume – Suspends an erase operation to read data from, or program data to, a sector that is not being erased, then resumes the erase operation  Top or Bottom Boot Block Configurations Available  Compatibility with JEDEC standards – Pinout and software compatible with single-power supply Flash – Superior inadvertent write protection Software Features  CFI (Common Flash Interface) Compliant – Provides device-specific information to the system, allowing host software to easily reconfigure for different Flash devices  Data# Polling and Toggle Bits – Provides a software method of detecting program or erase operation completion Hardware Features  Ready/Busy# Pin (RY/BY#) – Provides a hardware method of detecting program or erase cycle completion  Hardware Reset Pin (RESET#) – Hardware method to reset the device to reading array data  WP# input pin – For boot sector devices: at VIL, protects first or last 16 Kbyte sector depending on boot configuration (top boot or bottom boot) Cypress Semiconductor Corporation Document Number: 002-00777 Rev. *M • 198 Champion Court • San Jose, CA 95134-1709 • 408-943-2600 Revised June 13, 2017

ブランド

TI

会社名

Texas Instruments Incorporated

本社国名

U.S.A

事業概要

世界25ヶ国以上に製造・販売拠点を有する国際的な半導体企業であり、デジタル情報家電、ワイヤレス、ブロードバンド市場に欠かせないデジタル信号処理を行うDSPと、それに関連するアナログIC、マイクロコントローラを主力製品としている。

供給状況

 
Not pic File
データシート
pdf

提携先在庫情報

型式 数量 D/C・lead 備考 選択
S29AL016J70TFI010 20000個 21+RoHS  
S29AL016J70TFI010 10000個    
S29AL016J70TFI010 10000個    
S29AL016J70TFI010 10000個    
ご注文方法

弊社からの見積回答メールの返信又はFAXにてお願いします。


お取引内容はこちら
S29AL016J70TFI010の取扱い販売会社 株式会社クレバーテック  会社情報(PDF)    戻る


0.1473250389