TFM-1XX-XX-XXX-D-XXX
NOTES:
REVISION FD
1. C REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE FOR CONTACTS, WELD TABS,
No OF POSITIONS
AND THREADED INSERTS: 12 OZ.
LEAD STYLE -01, -02, -03: -02 THRU -50 (ALL
3. MINIMUM LOCKING CLIP RETENTION: 8 OZS.
POSITIONS AVAILABLE)
4. MAXIMUM HEIGHT VARIATION BETWEEN ANY TWO PINS: .005[0.13]
LEAD STYLES -11, -12, -13: (-05 THRU -50 MULTIPLES OF 5)
5. MAXIMUM TERMINAL BURR: .003[0.08]
POSITIONS 12, 16, 17 ALSO AVAILABLE
6. COPLANARITY: .004[0.10] = POS 02 THRU 26 C
LEAD STYLES -21, 22, 23: (-05 THRU -50 MULTIPLES OF 5)
.006[0.15] = POS 27 THRU 50
POSITIONS 12 & 13 ALSO AVAILABLE
7. MEASURED FROM BEND.
LEAD STYLES 31, 32: 12 POSITION ALSO AVAILABLE
8. DIMENSION CHANGED PER REVISION AD. CONTACT ENGINEERING
FOR INFORMATION.
9. MEASURE FROM TIPS OF PIN.
LEAD STYLE
10. THIS FEATURE ONLY PRESENT ON -01 &-02 LEAD STYLES.
THROUGH HOLE
SURFACE MOUNT
11. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED,
-01, -03 (SEE FIG 1)
-02 (SEE FIG 2)
THE –LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC
-11, -13 (SEE FIG 1)
-12 (SEE FIG 2)
RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE
-21,-23 (SEE FIG 1)
-22 (SEE FIG 2)
–LC OPTION.
-31 (SEE FIG 1)
-32 (SEE FIG 2)
12. SIDES OF PLASTIC BODIES ON ALL LEAD STYLES EXCEPT THE -01, -02 & -03
PLATING SPECIFICATION
WILL BE SOLID AND WITHOUT SIDE SLOTS.
13. NOTE DELETED.
-S: 30µ" SELECTIVE GOLD ON CONTACT AREA,
DO NOT
SCALE FROM
THIS PRINT
MATTE TIN TAIL
-L: 15µ" SELECTIVE GOLD ON CONTACT AREA,
MATTE TIN TAIL
-F: 3µ" FLASH GOLD ON CONTACT AREA,
MATTE TIN TAIL
-H: 30µ" SELECTIVE GOLD ON CONTACT AREA,
3µ" FLASH GOLD ON TAIL
-SM: 30µ" SELECTIVE GOLD ON CONTACT AREA,
MATTE TIN TAIL
-LM: 15µ" SELECTIVE GOLD ON CONTACT AREA,
MATTE TIN TAIL
-FM: 3µ" FLASH GOLD ON CONTACT AREA,
MATTE TIN TAIL
-STL: 30µ" SELECTIVE GOLD ON CONTACT AREA,
TIN/LEAD (90/10 ±5%) TAIL
(No OF POSITIONS x .050[1.27]) + .125[3.18] REF
(No OF POSITIONS x .050[1.27]) + .025[.64] REF
.110 2.79 REF
02
.155 3.94
REF
01
.050 1.27
REF
.075 1.91
REF
.225 5.72
REF
SEE NOTE 10
BODY SPECIFICATION
-D: DOUBLE ROW
C
(No OF POSITIONS x .050[1.27]) - .050[1.27]
.018 0.46 REF
"A"
2 MAX SWAY
(EITHER DIRECTION)
.050 1.27
2 MAX SWAY
(EITHER DIRECTION)
.135 3.43 REF
"D" REF
(SEE TABLE 1,
SHT 7)
.096 2.44
(SEE NOTE 8)
.1635 4.153
"A" REF
REF
(SEE TABLE 1,
SHT 7)
SEE NOTE 12
"A"
.014 0.36 REF
2 MAX SWAY
(EITHER DIRECTION) C
(No OF POSITIONS x .050[1.27]) - .050[1.27]
C
.010 0.25 REF
C "J" ± .003 [0.08]
(SEE TABLE 1, SHT 7)
.050 1.27 C
2 MAX SWAY
(EITHER DIRECTION)
SECTION "A"-"A"
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
"C"±.003 [0.08] C
(SEE TABLE 1,
SHT 7)
DECIMALS
FIG 1
THROUGH HOLE
-01, -03, -11, -13, -21, -23, -31
ANGLES
.XX: .01[0.3]
2
.XXX: .005[0.13]
.XXXX: .0020[0.051]
MATERIAL:
*
DO NOT SCALE DRAWING
TERMINAL: PHOSPHOR BRONZE
F:\DWG\MISC\MKTG\TFM-1XX-XX-XXX-D-XXX-MKT.SLDDRW
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
INSULATOR:
LCP, UL 94-VO
COLOR: BLACK
IN-PROCESS
PROPRIETARY NOTE
OPTION
-A: ALIGNMENT PIN (USE TFM-XX-D-XX-A,
SEE TABLE 1) (SEE FIG 8, SHT 3)
(NOT AVAILABLE FOR -RA OR -REX)
-LC: LOCKING CLIP (USE LC-05-TM)
(NOT AVAILABLE FOR -RA OR -REX)
(SEE FIG 10, SHT 3 & NOTES 3 & 11)
-P: PICK AND PLACE PAD (USE PPP-04)
(AVAILABLE IN ALL POSITIONS -05 THRU
-50 EXCEPT -05 WITH -WT)
(NOT AVAILABLE FOR -RA OR -REX,
SEE FIG 7, SHT 3)
-RA: RIGHT ANGLE
(AVAILABLE ONLY IN LEAD STYLE: -01
SEE FIG 5, SHT 2)
-TR: TAPE AND REEL (SEE FIG 4, SHT 7)
(NOT AVAILABLE WITH -DS OPTION
OR THROUGH HOLE LEAD STYLE)
-SA: STAKED ALIGNMENT PIN (SEE FIG 9, SHT 3)
(NOT AVAILABLE FOR -RA OR -RE)
-K: POLYIMIDE FILM (SEE FIG 3, SHT 2)
(USE K-DOT-.217-.313-.005)
(NOT AVAILABLE FOR -RA OR -REX)
(ALL LEAD STYLES EXCEPT -21 AVAILABLE)
-WT: WELD TABS (USE WT-25-XX-T)
(AVAILABLE ON -01, -02 & -03 LEAD
STYLES ONLY) (SEE FIG 6, SHT 2)
(MATES WITH SFSS/SFSD -SR & -DR ONLY)
(NOT AVAILABLE WITH -A, -LC,
-RA, OR -SA OPTIONS)
-RE1: RIGHT ANGLE ELEVATED .062 PCB
(USE TFM-XX-D-01-RE, NOT AVAILABLE
WITHOUT -WT, AVAILABLE IN LEAD
STYLE -01 ONLY, -03 THRU -50 POS)
(MATES WITH SFSS/SFSD -SR & -DR ONLY)
(SEE FIG 11, SHT 4)
-RE2: RIGHT ANGLE ELEVATED .093 PCB
(USE TFM-XX-D-01-RE, NOT AVAILABLE
WITHOUT -WT, AVAILABLE IN LEAD
STYLE -01 ONLY, -03 THRU -50 POS)
(MATES WITH SFSS/SFSD -SR & -DR ONLY)
(SEE FIG 11, SHEET 4)
-SN: SOLDER NAIL FOR .062 BOARD
(TFM-XX-D-01-SN AND WT-27-01-T)
(SEE FIG12, SHT 3)
(ONLY AVAILABLE WITH -02 LEAD STYLE)
(NOT AVAILABLE WITH OPTIONS -A, -LC,
-RA, -SA, -WT, -RE1 OR -RE2)
-SN2: SOLDER NAIL FOR .093 BOARD
(TFM-XX-D-01-SN AND WT-27-02-T)
(SEE FIG12, SHT 3)
(ONLY AVAILABLE WITH -02 LEAD STYLE)
(NOT AVAILABLE WITH OPTIONS -A, -LC,
-RA, -SA, -WT, -RE1 OR -RE2)
-DS: DUAL SCREW DOWN FOR .062 BOARD
(SEE FIG 18, SHT 5)
(ONLY AVAILABLE WITH -01 & -02 LEAD
STYLE)
(NOT AVAILABLE WITH OPTIONS -A, -LC, -P,
-RA, -TR, -SA, -K, -WT, -RE1, -RE2, -SN, -SN2)
(-01 LEAD STYLE USES TFM-XX-D-01-DSL
& T1-M2-4-VSFM-T, 02 LEAD STYLE USES
TFM-XX-D-01-DSA & T1-M2-4-VSFM-T)
SHEET SCALE: 2.5:1
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
.050 X .050 TERMINAL STRIP
TFM-1XX-XX-XXX-D-XXX
BY: garyp
11/5/2014
SHEET 1 OF 7
