Plastic Film Capacitors
Stacked Metallized PPS Film Chip Capacitor
Type:
ECHU(X)
Stacked metallized PPS film as dielectric with simple
mold-less construction
IFeatures
• Small in size (minimum size 1.6 mm ✕ 0.8 mm)
• 85 ˚C, 85 %RH, W.V. ✕ 1.0 for 500 hours
• For reflow soldering
• RoHS directive compliant
IRecommended Applications
• Time-constant
• Filtering
• Oscillation and resonance
IExplanation of Part Numbers
1
2
3
4
E
C
H
U
Product code
Dielectric &
construction
5
6
7
8
9
10
11
X
Rated voltage
Capacitance
Cap. Tol. Suffix
G ±2 %
J ±5 %
01 10 VDC
1C 16 VDC
1H 50 VDC
ISpecifications
Category temp. range
(Including temperature-rise on unit surface)
Rated voltage
12
Suffix
Tape width
Reel diameter ❈ Tape width 8 mm
and diameter
8 mm
5
size ø180 mm ø330 mm reel is
prepared.
12 mm
9
size ø330 mm
−55 ℃ to +125 ℃
10 VDC,16 VDC,50 VDC
(50 VDC: 0.12 µF or more: Derating or rated voltage by 1.25 % / ℃at more than 105 ℃)
Capacitance range
0.00010 µF to 0.22 µF (E12)
Capacitance tolerance
±2 %(G), ±5 %(J)
Withstand voltage
Between terminals : Rated volt. (VDC)✕150 % 60 s
Dissipation factor (tan )
tanδ≦0.6 % (20 ℃, 1 kHz)
Insulation resistance (IR)
Soldering conditions
10 VDC:IR≧3000 MΩ (20 ℃, 10 VDC, 60 s)
16 VDC:IR≧3000 MΩ (20 ℃, 10 VDC, 60 s)
50 VDC:IR≧3000 MΩ (20 ℃, 50 VDC, 60 s)
Reflow soldering : 260 ˚C max. and 95 sec max. at more than 220 ˚C (Temp. at cap. surface)
❈ Please consult us for flow soldering
❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please
refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
IConstruction
IDimensions in mm (not to scale)
saize
code
L
W
H
e
g
K1
1.6
0.8
0.7
0.35
≧0.4
J1
J2
H1
2.0
2.0
3.2
1.25
1.25
1.6
0.9
1.1
0.9
0.45
0.45
0.65
≧0.6
≧0.6
≧1.0
H2
H3
3.2
3.2
1.6
1.6
1.1
1.5
0.65
0.65
≧1.0
≧1.0
G1
G2
G3
3.2
3.2
3.2
2.5
2.5
2.5
1.1
1.5
2.1
0.65
0.65
0.65
≧1.0
≧1.0
≧1.0
E1
E2
4.8
4.8
3.3
3.3
1.5
2.1
0.80
0.80
≧2.0
≧2.0
D1
D3
D4
6.0
6.0
6.0
4.1
4.1
4.1
1.9
2.5
2.8
0.80
0.80
0.80
≧2.0
≧2.0
≧2.0
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.