Catalog 1308242
Issued 3-03 (PDF Rev. 4-04)
AXICOM
V23026 (P1) series
Miniature, Sealed
PC Board Relay
File E48393
File LR45064-5
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that user also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Coil Data @ 23°C
Features
• Surface and through-hole mounting types.
• 1 Form C contact arrangement.
• Latching or non-latching versions available.
• Switches loads from dry circuit to 1 amp.
• Washable – meets IEC protection class IP67.
• Low coil power requirement for IC compatibility.
• Terminals arranged on 0.1” grid.
• Designed for compact, high density mounting, 106.6mm2 surface area.
• Ideal for data and communication systems.
Contact Data @ 23°C
Arrangements: 1 Form C (SPDT) bifurcated contacts.
Material & Style:Palladium-Nickel with Gold-Rhodium overlay.
Expected Mechanical Life: 1 billion operations.
Expected Electrical Life: 50 million ops. at 10mA, 12VDC;
10 million ops. at 100mA, 6VDC;
100,000 ops. at 1A, 30VDC.
Contact Ratings:
Maximum Switched Voltage: 125VDC, 150VAC.
Maximum Switched Current: 1A.
Maximum Carrying Current: 1A.
Maximum Switched Power: 30W (DC), 60VA (AC).
Minimum Switched Capability: 100µV.
UL/CSA Contact Ratings: 1A @ 30VDC;
460mA @ 65VDC;
460mA @ 150VAC.
Initial Contact Resistance: 50 milliohms max. @ 10mA, 20mV.
Nominal
Voltage
(VDC)
Maximum
Operating
Voltage (VDC)
Nominal
Power
(mW)
Resistance
(Ohms)
± 10%
Coil Number
Order Designation
(Step 4 in Ordering
Information chart)
36
137
370
1,165
2,250
3,100
4,500
7
6
1
5
2
3
4
28
113
313
1,013
1,800
2,813
4,500
7
6
1
5
2
3
4
Non-Latching — Through-Hole versions (A1)
1.5
3
5
9
12
15
24
4.5
8.8
14.5
25.5
35
42
50
63
66
67
69
64
72
128
Non-Latching — Surface-Mount versions (D1)
1.5
3
5
9
12
15
24
4
8
13.3
24
32
40
50
80
80
80
80
80
80
128
Bistable, Dual Coils — Through-Hole and Surface-Mount versions (B1,E1)
(values are the same for each coil)(1)
1.5
3
5
9
12
15.
4.25
8.55
14.75
14.75
29
29
70
69
64
68
96
150
32
130
390
1,200
1,500
1,500
7
6
1
5
2
3
Bistable, Single Coil — Through-Hole and Surface-Mount versions (C1,F1)
High Frequency Data
Capacitance: Between Open Contacts: 5pF, max.
Between Coil and Contacts: 6pF, max.
RF Characteristics: Isolation at 100 / 900 MHz: -30.9 db / -18.0 db.
Insertion loss at 100 / 900 MHz: -0.12 db / -1.9 db.
V. S. W. R. at 100 / 900 MHz: 1.06 / 1.75 .
1.5
3
5
9
12
15.
24
6
13
20
35
50
50
50
37
30
34
38
32
50
128
61
300
740
2,160
4,500
4,500
4,500
5
6
1
7
2
3
4
(1) The specified voltages apply with only one coil energized.
Operate Data @ 23°C
Initial Dielectric Strength
Between Open Contacts: 500V rms for 1 minute.
Between Contacts and Coil: 1,500V rms for 1 minute.
Surge Voltage Resistance per Bellcore TR-NWT-001089 (2 / 10 µs):
Between Open Contacts: 2,000V on request.
Between Coil and Contacts: 2,500V.
Surge Voltage Resistance per FCC 68 (10 / 160 µs):
Between Open Contacts: 1,500V on request.
Between Coil and Contacts: 1,500V.
Note: Consult factory regarding availability of models meeting high surge
resistance requirements between open contacts.
Initial Insulation Resistance
Between Mutually Insulated Conductors: 109 ohms @ 500VDC.
Must Operate Voltage: 75% of nominal voltage or less.
Must Release Voltage: 10% of nominal voltage or less.
Max. Continuous Thermal Load : 500mW.
Operate Time (Excluding Bounce)†: 1 ms, typ.
Operate Bounce Time†: 1 ms, typ.
Release Time (Excluding Bounce)†: 0.4 ms, typ.
Set Time (Latching)†: 1 ms, typ.
Reset Time (Latching)†: 1 ms, typ.
Maximum Switching Rate: 200 operations/second.
† At or from Nominal Coil Voltage
Environmental Data
Temperature Range: -40°C to +70°C.
Vibration, Operational: 40g, 10-200 Hz; 20g, 200-2000 Hz.
Shock, Operational: 50g at 11 ms 1/2 sinusoidal impulse.
Resistance to Soldering Heat: 260°C for 10s. Internal relay temperature
should not exceed 210°C.
Needle Flame Test: Application time 20s, burning time <15s.
Coil Data @ 23°C
Voltage: 1.5 to 24VDC.
Thermal Resistance at Continuous Thermal Load: 130°K per Watt.
Maximum Coil Temperature: 85°C.
Duty Cycle: Continuous.
Dimensions are shown for
314 reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Mechanical Data
Termination: Through-hole or surface mount printed circuit terminals.
Enclosure Type: Immersion cleanable, plastic sealed case.
Weight: 0.063 oz. (1.8g) approximately.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.