M25PE20
M25PE10
1 and 2 Mbit, page-erasable serial Flash memories
with byte alterability, 75 MHz SPI bus, standard pinout
Features
■
1 or 2 Mbit of page-erasable Flash memory
■
2.7 V to 3.6 V single supply voltage
■
SPI bus compatible serial interface
■
75 MHz clock rate (maximum)
■
Page size: 256 bytes
– Page Write in 11 ms (typical)
– Page Program in 0.8 ms (typical)
– Page Erase in 10 ms (typical)
■
SubSector Erase (32 Kbits)
■
Sector Erase (512 Kbits)
■
Bulk Erase (1 Mbit for M25PE10, 2 Mbits for
M25PE20)
■
Deep Power-down mode 1 µA (typical)
■
Electronic signature
– JEDEC standard two-byte signature
(8012h for M25PE20, 8011h for M25PE10)
– Unique ID code (UID) with 16 bytes readonly, available upon customer request only
in the T9HX process
■
Software write protection on a 64-Kbyte sector
basis
■
More than 100 000 Write cycles
■
More than 20 years data retention
■
Hardware write protection of the memory area
selected using the BP0 and BP1 bits
■
SO8N (MN)
150 mil width
Package
– ECOPACK® (RoHS compliant)
March 2008
VFQFPN8 (MP)
6 × 5 mm
Rev 5
1/64
www.numonyx.com
1
