Aluminum Electrolytic Capacitors/ S
Surface Mount Type
Series:
S
Type:
V
■ Features
● Endurance: 85 °C 2000 h
● Vibration-proof product is available upon request. (φ8 mm and larger)
● RoHS directive compliant
■ Specifications
Category Temp. Range
–40 °C to +85 °C
Rated W.V. Range
4 V.DC to 100 V.DC
Nominal Cap. Range
0.1 µF to 1500 µF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (µA) (Bi-Polar I < 0.02 CV or 6 (µA) After 2 minutes (Whichever is greater)
DC Leakage Current
tan δ
Please see the attached standard products list
W.V. (V)
6.3
10
16
25
35
50
63
Z(–25 °C)/Z(+20 °C)
7
4
3
2
2
2
2
3
3
Z(–40 °C)/Z(+20 °C)
Characteristics
at Low Temperature
4
100
15
8
6
4
4
3
3
4
4
(Impedance ratio at 120 Hz)
After applying rated working voltage for 2000 hours (Bi-polar:1000 hours for each polarity) at +85 °C
±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits.
±20 % of inisial measured value
Size code
Capacitance change
Endurance
A(φ3)
Rated W.V.
Cap. change
4 W.V to 50 W.V
B(φ4) to D, D8(φ6.3)
1000 hours ±30 %
4 W.V
6.3 W.V
< D(φ6.3) Miniature
> 10 W.V
tan δ
DC leakege current
1000 hours ±20 %
< 200 % initial specified value
< initial specified value
After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Shelf Life
After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change
Resistance to
Soldering Heat
±10 % of initial measured value
tan δ
< initial specified value
DC leakage current
< initial specified value
■ Frequency correction factor for ripple current
Frequency (Hz)
Correction factor
120
1.00
1k
1.30
10 k to
1.70
■ Dimensions in mm (not to scale)
Capacitance (µF)
33
4S
Series indentification
(S) or (A)
(A size=Lot number)
Mark for Lead-Free
Products
Black Dot (Square)
Rated voltage Mark (V.DC)
(6=6.3 V.DC)
Lot number
(No marking=A size)
L
5.4+- 0.1
0.2
0.1
5.4+ 0.2
5.4+- 0.1
0.2
5.4+- 0.1
0.2
7.7±0.3
6.2±0.3
10.2±0.3
10.2±0.3
A, B
(P)
H
L
Pressure Relief (φ10 and larger)
Size
D
code
A
3.0
B
4.0
C
5.0
D
6.3
D8
6.3
E
8.0
F
8.0
G
10.0
K
(I)
A±0.2
–
φD±0.5
Negative polarity marking (–)
(No marking for the bi-polar)
0.3 max.
+
H
3.3 4.5 max.
4.3 5.5 max.
5.3 6.5 max.
6.6 7.8 max.
6.6 7.8 max.
8.3 9.5 max.
8.3 10.0 max.
10.3 12.0 max.
(I)
Example:4V 33 µF (Polarized)
Marking color: BLACK
(Unit : mm)
B±0.2
■ Marking
50, 60
0.70
W
( ) Reference size
I
W
P
1.5
1.8
2.2
2.6
2.6
3.4
3.4
3.5
0.55±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.65±0.1
0.90±0.2
0.90±0.2
0.6
1.0
1.5
1.8
1.8
2.2
3.1
4.6
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EEE-9 –
K
0.15
0.35 + 0.20
0.15
0.35 + 0.20
0.15
0.35 + 0.20
+ 0.15
0.35 - 0.20
0.15
0.35 + 0.20
0.15
0.35 + 0.20
0.70±0.20
0.70±0.20
00 Nov. 2012