Discontinued as of September 30, 2010
AXM
MIL CONNECTORS
(AXM)
FOR PC BOARD
TO FLAT CABLE
ity
Dens
FEATURES
nting
mou
1. High density mounting is possible.
Even with mounting right next to another
connector, insertion into and removal
from the socket can be done, providing a
saving in the surface mounting space.
Long lever type
Short lever type
2. Lever with original stopper
construction for great strength
The original stopper construction reduces
the possibility of lever damage even
when excess load is applied to the lever
during socket insertion and removal, and
during transportation.
3. Metal pin-less lever construction
Noise prevention is considered in this
construction by not using metal pins,
which, if present, act as noise absorbing
antennas.
4. Incorrect insertion prevention
mechanism.
Because of the box type construction of
the header and the special key that is
used, incorrect insertion can be
prevented.
Also, by means of the special key that is
used, incorrect insertion into an adjacent
connector is prevented.
Compliance with RoHS Directive
ORDERING INFORMATION
1. Socket
AXM
1
1
5
1: MIL connectors (Socket)
10: 10 contacts 14: 14 contacts
34: 34 contacts 40: 40 contacts
16: 16 contacts
50: 50 contacts
20: 20 contacts
60: 60 contacts
26: 26 contacts
64: 64 contacts
30: 30 contacts
0: Without strain relief/10 contacts: with polarity guide
2: Without strain relief/Min. 14 contacts with polarity guide, 10 contacts without polarity guide
4: With strain relief/14 contacts with polarity guide, 10 contacts without polarity guide
9: With strain relief/10 contacts: with polarity guide
Connectors for industrial equipment
1: 1.27 mm
5: Au plating/Au plating
2. Header
AXM
2
1
2: MIL connectors (Header)
10: 10 contacts 14: 14 contacts
34: 34 contacts 40: 40 contacts
16: 16 contacts
50: 50 contacts
20: 20 contacts
60: 60 contacts
26: 26 contacts
64: 64 contacts
30: 30 contacts
0: Long lever
1: Short lever
2: Without lever
0: Straight (Min. 14 contacts with polarity slot, 10 contacts without polarity slot)
1: Angle (Min. 14 contacts with polarity slot, 10 contacts without polarity slot)
8: Straight (10 contacts with polarity slot)
9: Angle (10 contacts with polarity slot)
1: Au plating/Sn plating
panasonic-electric-works.net/ac
