Versatile Filtered Power Entry Module
IEC Inlet Filters FN 380
Rated currents up to 6 A
Single or dual-fuse holder
Approvals
Fuses Ø 6.3 x 32 mm Ø 5 x 20 mm
2-pole rocker switch
General purpose application
Optional medical versions (B type)
The FN 380 power entry module combines an IEC
inlet, a mains filter with asingle or dualfuse holder and
a 2-pole rocker switch. Choosing FN 380 product line
brings you the rapid availability of a standard filter
associated with the necessary safety acceptances.
Standard IEC connector filters are a practical solution
helping you to pass EMI system approval in a short
time. A wide selection on amperage ratings, fuse
options, mounting possibilities and filters for medical
applications are designed to offer you the desired
solution.
Features and benefits
Good conducted attenuation performance, based
on chokes with high saturation resistance and
excellent thermal behavior
Rear/front or snap-in mounting
Single or dual-fuse holder
USA Ø 6.3 x 32 mm or EU Ø 5 x 20 mm fuses
2-pole rocker switch
Technical specifications
Maximum continuous operating voltage
Operating frequency
Rated currents
High potential test voltage
Protection category
Temperature range (operation and storage)
Design corresponding to
Flammability corresponding to
MTBF @ 40°C/230V (Mil-HB-217F)
Rocker switch description
Function
Electrical specifications
Mechanical life
Switch ratings
Europe (ENEC)
USA (UL)
Canada (CSA)
Custom-specific versions are available on request
250 VAC, 50/60 Hz
50 to 400 Hz
2 to 6 A @ 40 °C max.
P –> PE 2000 VAC for 2 sec (standard types)
P –> PE 2500 VAC for 2 sec (B types)
P –> N 760 VAC for 2 sec
IP40 according to IEC 60529
-25 °C to +85 °C (25/85/21)
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
UL 94 V-2 or better
550,000 hours
2-pole, dark not illuminated
Marking I - 0
Inrush current 51 A
6,000 on-off operations according to UL 1054, TV 5
10,000 on-off operations according to ENEC
50,000 cycles
6 A (4 A), 250 VAC*
6A, 125 VAC; 4 A, 250 VAC; 1/10 HP
6 A, 125 VAC; 4 A, 250 VAC; 1/10 HP
* Value in () relates to the inductive current charge: cos φ = 0.65
Typical applications
Portable electrical and electronic equipment
Consumer goods
EDP and office equipment
Single-phase power supplies, switch-mode power
supplies
Test and measurement equipment
Medical equipment
