GP1A05/GP1A22LC/GP1A23LC/GP1A25LC
OPIC Photointerrupter with
Connector
GP1A05/GP1A22LC/
GP1A23LC/GP1A25LC
s Features
s Applications
1. Uses 3-pin connector terminal
2. High sensing accuracy ( Slit width : 0.5mm )
3. Wide gap between light emitter and detector ( 5mm )
1. Copiers, Printers
2. Facsimiles
* “ OPIC ” ( Optical IC ) is a trademark of SHARP
Corporation. An OPIC consists of a light-detecting element
and signal-processing circuit integrated onto a single chip.
s Outline Dimensions
( Unit : mm )
GP1A22LC ( Same as GP1A05 except connector )
GP1A05
φ 4.2 ± 0.2
3 2
(2.5)
4.0+ 0
- 0.1
11.0± 0.1 12.0± 0.1
g JAPAN AMP made
EI 3-pin connector 171825-3
1
(2.5)
(2.5)
* Unspecified tolerances shall be as follows ;
Dimensions(d) Tolerance
d < 4.0
± 0.2
4.0<=d < 16.0
± 0.3
16 <=d
± 0.5
* ( ) : Reference dimensions
(2.5)
* ( ) : Reference dimensions
g 2 protrusion of connector
from holder: MAX.1.0
g 1 JAPAN SOLDERLESS
TERMINAL MSG. CO.,
LTD. made connector
B3P-SHF-1AA
Recommended connectors
on the inserted side
Housing : H3P-SHF-AA
Terminal : SHF-001T-0.8SS
etc. gg
( 9.2 )
Recommended connectors
on the inserted side
172053-3 etc. gg
11.0±
0.3
11.0 ± 0.3
GP1A25LC ( Same as GP1A05 except connector )
1 V CC
2 GND
3 VO
3 2 1
(2.5)
* ( ): Reference dimensions
g JAPAN SOLDERLESS
TERMINAL MSG. CO.,
LTD. made connector
BS3P-SHF-1AA
Recommended connectors
on the inserted side
Housing :
(H3P-SHF-AA ) etc gg
Terminal :
(SHF-001T-0.8SS ) etc.
g
2
3
(2.5)
(5.9)
(9.9)
g
5.5 ± 1.0
1
1 V CC
2 GND
3 VO
1 V CC
2 GND
3 VO
GP1A23LC ( Same as GP1A05 except connector )
(2.5)
3 2
g1
5.5 ± 1.0
C0.5
5.5 ± 1.0
3.0 7.5 10.5
3.5
Slit width 0.5
g
φ
7.0
(10.4)
34.0
15.0
5.0 5.0
1.0MAXg 2
φ 3.0 ± 0.1Depth2.0
3.5
11.0
11.0
3.5
± 0.3
2.0
1
(2.5)
1 V CC
2 GND
3 VO
* ( ) : Reference dimensions
g MOLEX JAPAN CO.,
LTD. made connector
5267-03A
Recommended connectors
on the inserted side
Housing : 5264-03
Terminal : 5263PBT
gg Recommended connectors on the inserted side are show on the following 3rd page.
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs,
data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.”