2N6071A/B Series
Preferred Device
Sensitive Gate Triacs
Silicon Bidirectional Thyristors
Designed primarily for full-wave ac control applications, such as
light dimmers, motor controls, heating controls and power supplies; or
wherever full-wave silicon gate controlled solid-state devices are
needed. Triac type thyristors switch from a blocking to a conducting
state for either polarity of applied anode voltage with positive or
negative gate triggering.
• Sensitive Gate Triggering Uniquely Compatible for Direct Coupling
to TTL, HTL, CMOS and Operational Amplifier Integrated Circuit
Logic Functions
• Gate Triggering 4 Mode — 2N6071A,B, 2N6073A,B, 2N6075A,B
• Blocking Voltages to 600 Volts
• All Diffused and Glass Passivated Junctions for Greater Parameter
Uniformity and Stability
• Small, Rugged, Thermopad Construction for Low Thermal
Resistance, High Heat Dissipation and Durability
• Device Marking: Device Type, e.g., 2N6071A, Date Code
http://onsemi.com
TRIACS
4 AMPERES RMS
200 thru 600 VOLTS
MT2
MT1
G
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
*Peak Repetitive Off-State Voltage(1)
(TJ = 40 to 110°C, Sine Wave,
50 to 60 Hz, Gate Open)
2N6071A,B
2N6073A,B
2N6075A,B
VDRM,
VRRM
*On-State RMS Current (TC = 85°C)
Full Cycle Sine Wave 50 to 60 Hz
IT(RMS)
4.0
Amps
ITSM
30
Amps
I2t
3.7
A2s
PGM
10
Watts
PG(AV)
0.5
Watt
VGM
5.0
Volts
TJ
–40 to
+110
°C
Tstg
–40 to
+150
°C
—
8.0
in. lb.
*
*Peak Non–repetitive Surge Current
(One Full cycle, 60 Hz, TJ = +110°C)
Circuit Fusing Considerations
(t = 8.3 ms)
*Peak Gate Power
(Pulse Width ≤ 1.0 µs, TC = 85°C)
*Average Gate Power
(t = 8.3 ms, TC = 85°C)
*Peak Gate Voltage
(Pulse Width ≤ 1.0 µs, TC = 85°C)
*Operating Junction Temperature Range
*Storage Temperature Range
Mounting Torque (6-32 Screw)(2)
Volts
200
400
600
3
2 1
TO–225AA
(formerly TO–126)
CASE 077
STYLE 5
PIN ASSIGNMENT
1
Main Terminal 1
2
Main Terminal 2
3
Gate
ORDERING INFORMATION
(1) VDRM and VRRM for all types can be applied on a continuous basis. Blocking
voltages shall not be tested with a constant current source such that the
voltage ratings of the devices are exceeded.
(2) Torque rating applies with use of a compression washer. Mounting torque in
excess of 6 in. lb. does not appreciably lower case-to-sink thermal
resistance. Main terminal 2 and heatsink contact pad are common.
Package
Shipping
2N6071A
TO225AA
500/Box
2N6071B
*Indicates JEDEC Registered Data.
Device
TO225AA
500/Box
2N6073A
TO225AA
500/Box
2N6073B
TO225AA
500/Box
2N6075A
TO225AA
500/Box
2N6075B
TO225AA
500/Box
Preferred devices are recommended choices for future use
and best overall value.
© Semiconductor Components Industries, LLC, 2000
May, 2000 – Rev. 3
272
Publication Order Number:
2N6071/D
