TC74LCX138F/FN/FT/FK
TOSHIBA CMOS Digital Integrated Circuit
Silicon Monolithic
TC74LCX138F,TC74LCX138FN,TC74LCX138FT,TC74LCX138FK
Low-Voltage 3-to-8 Line Decoder with 5-V Tolerant Inputs and Outputs
The TC74LCX138 is a high-performance CMOS 3-to-8 decoder.
Designed for use in 3.3-V systems, it achieves high-speed
operation while maintaining the CMOS low-power dissipation.
The device is designed for low-voltage (3.3 V) VCC applications,
but it could be used to interface to 5-V supply environment for
inputs.
When the device is enabled, 3 binary select inputs (A, B and C)
determine which one of the outputs ( Y0 - Y7 ) will go low.
When enable input G1 is held low or either G2A or G2B is
held high, decoding function is inhibited and all outputs go high.
G1, G2A , and G2B inputs are provided to ease cascade
connection and for use as an address decoder for memory
systems.
All inputs are equipped with protection circuits against static
discharge.
Note: xxxFN (JEDEC SOP) is not available in
Japan.
TC74LCX138F
TC74LCX138FN
Features
•
Low-voltage operation: VCC = 1.65 to 3.6 V
•
High-speed operation: tpd = 6.0 ns (max) (VCC = 3.0 to 3.6 V)
•
Ouput current: |IOH|/IOL = 24 mA (min) (VCC = 3.0 V)
•
Latch-up performance: >±500 mA
•
Available in JEDEC SOP, JEITA SOP, TSSOP and
TC74LCX138FT
VSSOP (US)
•
Power-down protection provided on all inputs and outputs
•
Pin and function compatible with the 74 series
(74AC/VHC/HC/F/ALS/LS etc.) 138 type
TC74LCX138FK
Weight
SOP16-P-300-1.27A
SOL16-P-150-1.27
TSSOP16-P-0044-0.65A
VSSOP16-P-0030-0.50
: 0.18 g (typ.)
: 0.12 g (typ.)
: 0.06 g (typ.)
: 0.02 g (typ.)
Note: The Electrical Characteristics of VCC=1.8±0.15V is only applicable for products which manufactured
from January 2009 onward.
1
2010-01-31
TC74LCX138F/FN/FT/FK
System Diagram
15
A
14
1
13
Select
inputs
B
12
2
11
C
10
3
9
7
G2 A
Enable
inputs
G 2B
G1
4
Y0
Y1
Y2
Y3
Y4
Data
outputs
Y5
Y6
Y7
5
6
Absolute Maximum Ratings (Note 1)
Characteristics
Symbol
Rating
Unit
Power supply voltage
VCC
−0.5 to 7.0
V
DC input voltage
VIN
−0.5 to 7.0
V
−0.5 to 7.0 (Note 2)
DC output voltage
VOUT
Input diode current
IIK
−50
Output diode current
IOK
±50
DC output current
IOUT
±50
mA
Power dissipation
PD
180
mW
ICC/IGND
±100
mA
Tstg
−65 to 150
°C
DC VCC/ground current
Storage temperature
−0.5 to VCC + 0.5
(Note 3)
V
mA
(Note 4)
mA
Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or
even destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating range (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 2: VCC = 0 V
Note 3: High or low state. IOUT absolute maximum rating must be observed.
Note 4: VOUT < GND, VOUT > VCC
3
2010-01-31