HOME在庫検索>在庫情報

部品型式

USB3311-CP-TR

製品説明
仕様・特性

USB3311 Hi-Speed USB Transceiver with 1.8V ULPI Interface 26MHz Reference Clock PRODUCT FEATURES Data Brief USB-IF “Hi-Speed” compliant to the Universal Serial Bus Specification Rev 2.0 Interface compliant with the ULPI Specification revision 1.1 as a Single Data Rate (SDR) PHY 1.8V IO Voltage (+/- 10%) SMSC flexPWRTM Technology Carkit UART mode for non-USB serial data transfers Integrated USB Switch — Low current design ideal for battery powered applications — “Sleep” mode tri-states all ULPI pins and places the part in a low current state Industrial Operating Temperature -40°C to +85°C Packaging Options Supports FS pre-amble for FS hubs with a LS device attached (UTMI+ Level 3) Supports HS SOF and LS keep-alive pulse Includes full support for the optional On-The-Go (OTG) protocol detailed in the On-The-Go Supplement Revision 1.0a specification Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP) Allows host to turn VBUS off to conserve battery power in OTG applications Support OTG monitoring of VBUS levels with internal comparators “Wrapper-less” design for optimal timing performance and design ease — Low Latency Hi-Speed Receiver (43 Hi-Speed clocks Max) allows use of legacy UTMI Links with a ULPI bridge Internal 5V cable short-circuit protection of ID, DP and DM lines to VBUS or ground 26MHz Reference Clock operation — 0 to 3.6V input drive tolerant — Able to accept “noisy” clock sources Internal low jitter PLL for 480MHz Hi-Speed USB operation Internal detection of the value of resistance to ground on the ID pin Integrated battery to 3.3V LDO regulator — — — — — Allows single USB port of connection High speed data Battery charging Stereo and mono/mic audio USB1.1 data — 24 pin QFN lead-free RoHS compliant package (4 x 4 x 0.90 mm height) — 25 ball VFBGA lead-free RoHS compliant package also available; (3 x 3 x 0.88mm height) Applications The USB3311 is targeted for any application where a HiSpeed USB connection is desired and when board space, power, and interface pins must be minimized. The USB3311 is well suited for: Cell Phones PDAs MP3 Players GPS Personal Navigation Scanners External Hard Drives Digital Still and Video Cameras Portable Media Players Entertainment Devices Printers Set Top Boxes Video Record/Playback Systems IP and Video Phones Gaming Consoles POS Terminals — 2.2uF bypass capacitor — 100mV dropout voltage Integrated ESD protection circuits — Up to +-15kV without any external devices SMSC USB3311 PRODUCT PREVIEW Revision 1.3 (11-02-07)

ブランド

供給状況

 
Not pic File
お求め製品USB3311-CP-TRは、clevertechの営業担当が市場確認を行いメールにて見積回答致します。

「見積依頼」ボタンを押してお気軽にお進み下さい。

お支払方法

宅配業者の代金引換又は商品到着後一週間以内の銀行振込となります。


お取引内容はこちら

0.0611341000