TA48015F
TOSHIBA Bipolar Linear Integrated Circuit
Silicon Monolithic
TA48015F
1.5 V
Three-Terminal Low Dropout Voltage Regulator with Output Current of 1 A
The TA48015F consists of fixed-positive-output, low-dropout
regulators with an output current of 1 A (max) that utilize V-PNP
transistors for the output stage. This product responds to the
need for low-voltage and low-power dissipation devices for use in
consumer electronics and industrial appliances.
(1) TA48015F
Features
Maximum output current: 1 A
Output voltage accuracy: VOUT ± 3% (@Tj = 25°C)
(2) TA48015F (TE16L1, N)
Low standby current: 800 μA (typ.) (@IOUT = 0 A)
Low starting quiescent current
Low-dropout voltage: VD = 0.8 V (max) (@IOUT = 0.5 A)
Protection function: overheat /overcurrent
Package type: PW-Mold
TA48015F has a lead bending type package which is a
surface-mountable package and can be used for reflow
soldering.
Weight
HSIP3-P-2.30B: 0.36 g (typ.)
HSOP3-P-2.30D: 0.36 g (typ.)
Pin Assignment
Marking side
1
IN
3
2
GND OUT
Marking
48015F
Part No. (or abbreviation code)
Lot No.
(weekly code)
A line indicates
Lead(Pb)-Free Finish.
The product(s) in this document (“Product”) contain functions intended to protect the Product from
temporary small overloads such as minor short-term overcurrent or overheating. The protective
functions do not necessarily protect Product under all circumstances. When incorporating Product into
your system, please design the system (1) to avoid such overloads upon the Product, and (2) to shut
down or otherwise relieve the Product of such overload conditions immediately upon occurrence. For
details, please refer to the notes appearing below in this document and other documents referenced in
this document.
1
2008-04-22