MT9T031: 1/2-Inch 3-Mp Digital Image Sensor
Applications
1/2-Inch 3-Megapixel CMOS Digital
Image Sensor
MT9T031
For the latest data sheet, refer to Aptina’s Web site: www.aptina.com
Features
Table 1:
Aptina® DigitalClarity® imaging technology
High frame rate
Global reset release
Horizontal and vertical binning
Column and row skip modes
Superior low-light performance
Low dark current
Simple two-wire serial interface
Programmable controls: Gain, frame rate, frame size,
exposure
• Pin-for-pin compatible with Aptina’s 1.3-megapixel
MT9M001
1/2-inch (4:3)
6.55mm(H) x 4.92mm(V)
8.19 (Diagonal)
2,048H x 1,536V
3.2μm x 3.2μm
RGB Bayer pattern
Global reset release (GRR), electronic
rolling shutter (ERS)
48 MPS/48 MHz
Active pixels
Pixel size
Color filter array
Shutter type
Maximum data rate/
master clock
QXGA
(2,048 x 1,536)
UXGA
Frame (1,600 x 1,200)
rate
HDTV
(1,280 x 720)
XGA
(1,024 x 768)
VGA (640 x 480)
ADC resolution
Responsivity
Dynamic range
SNRMAX
Supply voltage
Power consumption
High resolution network cameras
Wide field of view cameras
Dome cameras with electronic pan, tilt, and zoom
Hybrid video cameras with high resolution stills
Detailed feature extraction for smart cameras
General Description
The Aptina® MT9T031 is a QXGA-format 1/2-inch
CMOS active-pixel digital image sensor with an active
imaging pixel array of 2,048H x 1,536V. It incorporates
sophisticated camera functions on-chip such as windowing, column and row skip mode, and snapshot
mode. It is programmable through a simple two-wire
serial interface.
Programmable up to 12 fps
Programmable up to 20 fps
Programmable up to 39 fps
Programmable up to 43 fps
Programmable up to 93 fps
10-bit, on-chip
>1.0 V/lux-sec (550nm)
61dB
43dB
3.0V−3.6V (3.3V nominal)
244mW (nominal);
1.65μW (standby)
0°C to 60°C
48-pin CLCC
Operating temperature
Packaging
The 3-megapixel CMOS image sensor features DigitalClarity—Aptina’s breakthrough low-noise CMOS imaging technology that achieves CCD image quality
(based on signal-to-noise ratio and low-light sensitivity) while maintaining the inherent size, cost, and integration advantages of CMOS.
Ordering Information
Table 2:
Available Part Numbers
Part Number
MT9T031C12STC
MT9T031C12STCD ES
MT9T031C12STCH ES
PDF: 3682685119/Source: 9830567334
MT9T031_DS - Rev.D 6/10 EN
Typical Value
Optical format
Active imager size
Applications
•
•
•
•
•
Key Performance Parameters
Parameter
•
•
•
•
•
•
•
•
•
1
Description
48-Pin CLCC
48-Pin CLCC demo
48-Pin CLCC headboard
Aptina reserves the right to change products or specifications without notice.
©2006 Aptina Imaging Corporation All rights reserved.
Products and specifications discussed herein are subject to change by Aptina without notice.