DATA SHEET
MOS Integrated Circuit
μ PD65881GB-P01
μPD71054-Compliant Programmable Timer/Counter Gate Array
Following the phase-out of its popular μ PD71054 standard programmable timer/counter, NEC Electronics is now
offering the μ PD65881GB-01 programmable timer/counter gate array, a functional and low-cost substitute for the
μ PD71054.
To verify the applicability of the μ PD65881GB-01 gate array as a replacement for the μ PD71054, you must first
test an equivalent prototype in the system being developed. If the in-system test is deemed successful, you may then
proceed to purchase mass production versions of the product.
DESCRIPTION
The μ PD65881GB-P01 incorporates an NA54A IP macro in a CMOS-N5 gate array. Internal block functions and
commands are the same as those of the μ PD71054. Differences between the two products are listed below. Before
adopting this product, carefully read the disclaimer below and the caution in section 3 (CAUTIONS WHEN
CONSIDERING ADOPTION OF THIS PRODUCT).
FEATURES
• Three independently operated 16-bit counters
• Six count modes for each counter
• Binary/BCD count operation
• Single 5V ±10% power supply
• Multiple latch commands for easy monitoring
• Count rate: 0 (DC) −33 MHz
• Industrial temperature range (Ambient): −40 to 85°C
• 44-pin QFP package
• RoHS-compliant materials
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. A18500EJ2V0DS00 (2nd edition)
Date Published December 2007 NS
Printed in Japan
© NEC Electronics Corporation 2007