S29AL016D
16 Megabit (2 M x 8-Bit/1 M x 16-Bit)
CMOS 3.0 Volt-only Boot Sector Flash Memory
Data Sheet
Distinctive Characteristics
Architectural Advantages
Ultra low power consumption (typical values
at 5 MHz)
Single power supply operation
— Full voltage range: 2.7 to 3.6 volt read and write operations for battery-powered applications
— 200 nA Automatic Sleep mode current
Manufactured on 200nm process technology
— 9 mA read current
— Fully compatible with
MBM29LV160E devices
200nm
Am29LV160D
— 200 nA standby mode current
— 20 mA program/erase current
and
Cycling endurance: 1,000,000 cycles per
sector typical
Data retention: 20 years typical
Flexible sector architecture
— One 16 Kbyte, two 8 Kbyte, one 32 Kbyte, and thirtyone 64 Kbyte sectors (byte mode)
— One 8 Kword, two 4 Kword, one 16 Kword, and thirtyone 32 Kword sectors (word mode)
Package Options
48-ball FBGA
48-pin TSOP
44-pin SOP
Sector Protection features
— A hardware method of locking a sector to prevent any
program or erase operations within that sector
— Sectors can be locked in-system or via programming
equipment
Software Features
CFI (Common Flash Interface) compliant
— Temporary Sector Unprotect feature allows code
changes in previously locked sectors
— Provides device-specific information to the system,
allowing host software to easily reconfigure for
different Flash devices
Unlock Bypass Program Command
Erase Suspend/Erase Resume
— Reduces overall programming time when issuing
multiple program command sequences
— Suspends an erase operation to read data from, or
program data to, a sector that is not being erased,
then resumes the erase operation
Top or bottom boot block configurations
available
Data# Polling and toggle bits
Compatibility with JEDEC standards
— Provides a software method of detecting program or
erase operation completion
— Pinout and software compatible with single-power
supply Flash
— Superior inadvertent write protection
Hardware Features
Ready/Busy# pin (RY/BY#)
Performance Characteristics
— Provides a hardware method of detecting program or
erase cycle completion
High performance
— Access times as fast as 70 ns
Hardware reset pin (RESET#)
— Extended temperature range (-40°C to +125°C)
Publication Number S29AL016D_00
Revision A
Amendment 3
Issue Date June 1, 2005
“This document states the current technical specifications regarding the Spansion product(s) described herein. Spansion LLC deems the products
to have been in sufficient production volume such that subsequent versions of this document are not expected to change. However, typographical
or specification corrections, or modifications to the valid combinations offered may occur.”
