GS2962 3G/HD/SD-SDI Serializer with Complete SMPTE Video Support
Key Features
•
•
•
Operation at 2.970Gb/s, 2.970/1.001Gb/s, 1.485Gb/s,
1.485/1.001Gb/s and 270Mb/s
Application: Dual Link (HD-SDI)
to Single Link (3G-SDI) Converter
HD-SDI
Link A
Supports SMPTE 425M (Level A and Level B), SMPTE
424M, SMPTE 292, SMPTE 259M-C and DVB-ASI
EQ
GS2974B
EQ
GS2974B
•
Integrated, low noise VCO
•
Optional conversion from SMPTE 425M Level A to
Level B for 1080p 50/60 4:2:2 10-bit
•
Parallel data bus selectable as either 20-bit or 10-bit
•
SMPTE video processing including TRS calculation and
insertion, line number calculation and insertion, line
based CRC calculation and insertion, illegal code
re-mapping, SMPTE 352M payload identifier
generation and insertion
HD-SDI
Deserializer
(GS1559 or
GS2970)
Ancillary data insertion
•
10-bit
FIFO
HV F/PCLK
W
3G-SDI
R
GS2962
10-bit
10-bit
FIFO
Integrated Narrow-Bandwidth PLL
•
10-bit
HV F/PCLK
HD-SDI
Link B
Integrated Cable Driver
HD-SDI
Deserializer
(GS1559 or
GS2970)
HV F/PCLK
W
HV F
R
GS4910
X TAL
Description
The GS2962 is a complete SDI Transmitter, generating a
SMPTE 424M, SMPTE 292, SMPTE 259M-C or DVB-ASI
compliant serial digital output signal.
The integrated narrow-BW PLL allows the device to accept
parallel clocks with high input jitter, and still provide a
SMPTE compliant serial digital output.
•
GSPI host interface
•
1.2V digital core power supply, 1.2V and 3.3V analog
power supplies, and selectable 1.8V or 3.3V I/O power
supply
The device can operate in four basic user selectable modes:
SMPTE mode, DVB-ASI mode, Data-Through mode, or
Standby mode.
•
-20ºC to +85ºC operating temperature range
•
Low power operation (typically at 400mW, including
Cable Driver)
•
Small 11mm x 11mm 100-ball BGA package
In SMPTE mode, the GS2962 performs all SMPTE
processing features. Both SMPTE 425M Level A and Level B
formats are supported with optional conversion from Level
A to Level B for 1080p 50/60 4:2:2 10-bit.
•
Pb-free and RoHS compliant
In DVB-ASI mode, the device will perform 8b/10b encoding
prior to transmission.
Applications
In Data-Through mode, all SMPTE and DVB-ASI processing
is disabled. The device can be used as a simple parallel to
serial converter.
Application: Single Link (3G-SDI)
to Dual Link (HD-SDI) Converter
10-bit
HD-SDI
GS2962
Link A
HV F/PCLK
3G-SDI
EQ
GS2974
The device can also operate in a lower power Standby
mode. In this mode, no signal is generated at the output.
GS2960
HV F/PCLK
10-bit
HD-SDI
GS2962
GS2962 3G/HD/SD-SDI Serializer with Complete
SMPTE Video Support
Data Sheet
48005 - 7
October 2010
Link B
The GS2962 integrates a fully SMPTE-compliant Cable
Driver for SMPTE 259M-C, SMPTE 292 and SMPTE 424M
interfaces. It features automatic dual slew-rate selection,
depending on 3Gb/s or HD or SD operational requirements.
www.gennum.com
1 of 82