GP1A50HR/GP1A51HR/GP1A52HR/GP1A53HR
OPIC
Photointerrupter
GP1A50HR/GP1A51HR
GP1A52HR/GP1A53HR
s Features
s Applications
1. High sensing accuracy ( Slit width : 0.5mm )
2. LSTTL and TTL compatible output
3. Both-sides mounting type : GP1A50HR ( Gap: 3mm )
Either-side mounting type : GP1A51HR ( Gap: 3mm )
PWB mounting type : GP1A52HR ( Gap: 3mm )
GP1A53HR ( Gap: 5mm )
1. OA equipment, such as printers, facsimiles,
etc.
2. VCRs
*“ OPIC” ( Optical IC ) is a trademark of the SHARP Corporation.
An OPIC consists of a light-detecting element and signalprocessing circuit integrated onto a single chip.
s Outline Dimensions
( Unit : mm )
19.0 ± 0.2
GP1A51HR
2.0
5.0
6.0
GP1A50HR
2 - φ 3.2 ± 0.2
2 - C2.0
(1.27)
7.0
2 - (1.27)
12.0
18.0
1
5
2
S
1
4
2
1.5
5 - 0.4 + 0.3
- 0.1
(1.5)
5
1
3
2
4
10.0
C1.0
5 - 0.45 + 0.3
- 0.1
(1.27)
(10.3)
(1.27)
*Unspecified tolerances shall be as follows:
Dimensions(d) Tolerance
d<=6.0
± 0.1
6.0< d<=18.0 ± 0.2
*( ) : Reference dimensions
0.5
Slit width
(Both sides
of emitter
and detector )
10.0MIN.
3.5
9.0MIN.
(1.27)
(9.2)
7.5
7.5
2.5
10.0
A52
(1.5)
5 - 0.45 + 0.3
- 0.1
5.2
1A53HR
1A52HR
+
5 - 0.4 - 0.3
0.1
C1.0
13.7 ± 0.3
5.0+ 0.2
- 0.1
3.5
3
5.0
0.5
Slit width
(Both sides
of emitter
and detector )
*Unspecified tolerances shall be as follows :
Dimensions(d) Tolerance
d<=6.0
± 0.1
6.0 < d<=18.0
± 0.2
*( ) : Reference dimensions
4
A53
12.2 ± 0.3
3.0 + 0.2
- 0.1
0.3
0.1
S
*Unspecified tolerances shall be as follows:
Dimensions(d) Tolerance
d<=6.0
± 0.1
6.0< d<=18.0 ± 0.2
18.0< d<=25.0 ± 0.025
*( ) : Reference dimensions
3
GP1A53HR
1.5
5 - 0.45+
-
(1.5)
(1.27)
GP1A52HR
3
9.0MIN.
5 - 0.4 + 0.3
- 0.1
(9.2)
1 4 5
Marking : 1A50HR
5
3.5
1.5
(1.5)
(9.2)
5 - 0.45 + 0.3
- 0.1
10.0
+
3.0 - 0.2
0.1
7.0
7.5
10.0
1.5
9.0MIN.
+ 0.3
0.1
5 - 0.4 -
2
12.2 ± 0.3
1A51HR
3.5
3.0 + 0.2
- 0.1
( Both sides of
emitter and
5.0 detector )
0.5
2- φ 3.2 ± 0.2
Slit width
6.0
Slit width
( Both sides of
0.5 emitter and
detector )
7.5
25.0 ± 0.3
12.2 ± 0.3
(1.27)
*Unspecified tolerances shall be as follows:
Dimensions(d) Tolerance
d<=6.0
± 0.1
6.0< d<=18.0 ± 0.2
18.0< d<=25.0 ± 0.25
*( ) : Reference dimensions
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs,
data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.”
