IDT23S05E
3.3V ZERO DELAY CLOCK BUFFER, SPREAD SPECTRUM
COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES
IDT23S05E
3.3V ZERO DELAY CLOCK
BUFFER, SPREAD SPECTRUM
COMPATIBLE
FEATURES:
DESCRIPTION:
•
•
•
•
•
•
•
•
•
•
•
•
•
The IDT23S05E is a high-speed phase-lock loop (PLL) clock buffer,
designed to address high-speed clock distribution applications. The zero
delay is achieved by aligning the phase between the incoming clock and
the output clock, operable within the range of 10 to 200MHz.
The IDT23S05E is an 8-pin version of the IDT23S09E. IDT23S05E
accepts one reference input, and drives out five low skew clocks. The -1H
version of this device operates up to 200MHz frequency and has a higher
drive than the -1 device. All parts have on-chip PLLs which lock to an input
clock on the REF pin. The PLL feedback is on-chip and is obtained from the
CLKOUT pad. In the absence of an input clock, the IDT23S05E enters
power down. In this mode, the device will draw less than 12µA for
Commercial Temperature range and less than 25µA for Industrial temperature range, the outputs are tri-stated, and the PLL is not running, resulting
in a significant reduction of power.
The IDT23S05E is characterized for both Industrial and Commercial
operation.
Phase-Lock Loop Clock Distribution
10MHz to 200MHz operating frequency
Distributes one clock input to one bank of five outputs
Zero Input-Output Delay
Output Skew < 250ps
Low jitter <200 ps cycle-to-cycle
IDT23S05E-1 for Standard Drive
IDT23S05E-1H for High Drive
No external RC network required
Operates at 3.3V VDD
Power down mode
Spread spectrum compatible
Available in SOIC package
FUNCTIONAL BLOCK DIAGRAM
8
CLKOUT
REF
1
3
PLL
CLK1
Control
Logic
2
5
CLK2
CLK3
7
CLK4
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES
MARCH 2006
1
c
2006
Integrated Device Technology, Inc.
DSC - 6398/7