800 series
Snap-action momentary pushbutton switches
Distinctive features and specifications
K Panel and PC mount models
K Snap-in panel mounting version
K Tactile feedback
B
MATERIALS
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load :
- gold over nickel plated brass contacts : 0.4VA - 20V max.
- coin silver contacts : 6A 125VAC, 3A 250VAC, 7A 30VDC
• Initial contact resistance : 20 mΩ max.
• Insulation resistance : 2,000 MΩ min. between terminals & case ground.
• Dielectric strength : 1,500 VAC for 1 minute between terminals & case
ground.
• Electrical life : 60.000 cycles at full load
GENERAL SPECIFICATIONS
AGENCY APPROVAL
• Total travel : 0.9mm (.035)
• Actuation force:
Single pole: 290+/- 75g
Double pole: 550+/- 75g
• Operating temperature : -30°C to +85°C
• Soldering : 300°C, 3 sec. max.
APEM
• Case : DAP
• Actuator : polyamide, glass
filled
• Bushing : brass, nickel plated
• Strap : stainless steel
• Bracket : tin plated steel or brass
• Contacts
B: Gold
Q : Coin Silver
• Terminal seal : epoxy
Availability: All models with coin
silver contacts (Q) only.
:
Marking: To order switches
marked UL, complete appropriate
box on ordering format.
www.apem.com