R.46 S
Loose
X2 CLASS (IEC 60384-14) - MKP Series
metallized polyPROPYLENE film capacitor
SELF-HEALING PROPERTIES
Taped
Fig.1
VERSION
Fig.2
Typical applications: This special R46 release is designed
for applications in series with the main
.
PRODUCT CODE: R46
Not for new design.
Not for use in series with the mains.
See www.kemet.com for more information.
Pitch Box thickness (B)
(mm)
(mm)
Ø d ±0.05
p ≤15
22.5 ≤ p ≤ 27.5
0.6 or 0.8*
0.8
10.0
15.0
15.0
22.5
27.5
37.5
p = 37.5
1.0
*See size table.
All dimensions are in mm.
Maximum dimensions (mm)
B max
H max
L max
B +0.2
B +0.2
B +0.2
B +0.2
B +0.2
B +0.3
All
<7.5
≥7.5
All
All
All
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
H +0.1
GENERAL TECHNICAL DATA
test method and performance
Dielectric: polypropylene film.
L +0.2
L +0.3
L +0.5
L +0.3
L +0.3
L +0.3
Damp heat, steady state:
Plates: metal layer deposited by evaporation under vacuum.
Test conditions 1st
Winding: non-inductive type.
Temperature:
+40°C ± 2°C
Relative humidity (RH): 93% ±2%
Test duration:
56 days
Leads: tinned wire.
Protection: plastic case, thermosetting resin filled.
Box material is solvent resistant and flame retardant according to
UL94 V0.
Test conditions 2nd
Temperature:
+60°C ± 2°C
Relative humidity (RH): 95% ±2%
Test duration:
500 hours
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive flammability category, manufacturing date code, approvals,
manufacturing plant.
Test conditions 3rd
Temperature:
+40°C ± 2°C
Relative humidity (RH): 93% ±2%
Test duration:
500 hours
Voltage value:
230 Vac, 50 Hz
Climatic category: 40/110/56 IEC 60068-1
Operating temperature range: -40 to +110°C
Related documents:
IEC 60384-14, EN 60384-14.
electrical characteristics
Rated voltage (VR):
Capacitance range:
275Vac (50/60Hz) / 560 Vdc
Performance
Dielectric strength: no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacitance change |∆C/C|: ≤5%
Insulation resistance: ≥50% of initial limit.
0.022µF to 10µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M).
tolerance ±5% (J) available upon request
Endurance:
Test conditions
Temperature:
Test duration:
Voltage applied:
Dissipation factor (DF):
tgδ 10-4 at +25°C ±5°C: ≤15 (8)* at 1kHz
* Typical value
Performance
Insulation resistance:
Test conditions
Temperature:
Voltage charge time:
Voltage charge:
Performance
≥1x105 MΩ (5x105 MΩ )*
≥30000 s (150000 s )*
* Typical value
+25°C±5°C
1 min
100 Vdc
+110°C ± 2°C
1000 h
1.25 x VR +1000Vac 0.1 s/h
Dielectric strength:
no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacitance change |∆C/C|: ≤10%
Insulation resistance: ≥50% of initial limit.
Resistance to soldering heat:
Test conditions
for C≤0.33µF
for C>0.33µF
Solder bath temperature: +260°C ± 5°C
Dipping time (with heat screen):10 s ± 1 s
Test voltage between terminations (on all pieces):
1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C
Performance
Capacitance change |∆C/C|: ≤2%
155
09/2008
